background image

Notice for measuring the heart rate

When measuring your heart rate, wear the Galaxy Fit2 snugly on your arm above your wrist 

as shown in the figure below. Do not fasten the Galaxy Fit2 too tightly.

<Rear>

Heart rate sensor

The accuracy of the heart rate sensor can be affected depending on the user’s 

movements, personal physiology, and the measurement conditions and 

surroundings. Take heart rate measurements when you are seated and relaxed.

Do not look directly at the heart rate sensor’s lights. Doing so may impair your

vision.

If your device becomes hot to the touch, please remove it until it cools. Exposing

skin to a hot surface of the device for a long time may cause skin burn.

Accessing more information

To view the full user manual and the full safety information, including device and battery 

disposal instructions, launch the 

Galaxy Wearable

 app on your mobile device and tap 

 

User manual

. Or, visit 

www.samsung.com/ca.

The method for accessing the user manual from the Galaxy Wearable app may

vary depending on your mobile device.

The user manual may not be available depending on the web browser or service

provider.

Connecting the Galaxy Fit2 to a mobile device

 

On your mobile device, launch 

 or 

 and download the Galaxy 

Wearable app, launch it, and then follow the on-screen instructions to complete the 

connection.

Connection methods and screen may vary depending on your mobile device and

software version.

Supported mobile devices and features may vary depending on your region,

service provider, and device manufacturer.

Charging the battery

After purchasing the Galaxy Fit2 , connect the charger to turn on the power. You must first 

charge the battery sufficiently. After fully charging your Galaxy Fit2, pull on the handle of the 

charger to disconnect it.

USB cable charging dock

Use only Samsung-approved chargers.

The Galaxy Fit2  has no separate power key and is powered on when the battery

is charged.

The charger should remain close to the electric socket and be easily accessible

while charging.

Package contents

Galaxy Fit2

USB cable charging dock

Quick start guide

The items supplied with the Galaxy Fit2 and their images may vary by region.

Device layout

Charging contacts

Pressure vent

Do not insert sharp objects into the pressure vent. Inner components of the 

Galaxy Fit2  may be damaged along with the water-resistance feature.

Printed in Korea

GH68-50109K Rev.1.1

English (CA). 05/2019

Quick Start Guide

 

SM-R

Taking off the Galaxy Fit2

When taking off the Galaxy Fit2, pull down on the buckle and pull it out as shown in the 

figure below.

THIS DEVICE AND ANY SOFTWARE, SERVICE, FUNCTION PROVIDED THEREIN IS SOLELY

INTENDED FOR FITNESS AND WELLNESS PURPOSES ONLY AND IS NOT INTENDED 

FOR USE IN THE DIAGNOSIS OF DISEASE OR OTHER CONDITIONS, OR IN THE CURE, 

MITIGATION, TREATMENT OR PREVENTION OF DISEASE.

Any information that is obtained from use of the Galaxy Fit2 or the Fit Software or any

application preloaded within may not be suitable, accurate, complete or reliable.

R375_QSG_CA_ENG_2.indd   1

5/4/2019   6:02:16 AM

Galaxy Store Play 

Summary of Contents for Galaxy Fit2 SM-R 220













Reviews: