Part No.S2080-0001 (75 mm) / S2080-0002 (100 mm)
aktiv bowl connector 75 mm / 100 mm
Please refer to the aktiv fluid head user guide S2068-4980 for safety instructions.
Fitting Bowl Connector For The 1st Time
Note!
Fitting and adjusting the Bowl Connector to the tripod is a one time effort, once set, it is left on the tripod and
remains ready without further adjustment required.
Connector Stud
Connector Adjustment Knob
Retaining Clip
The Bowl Connector comes in 2 parts:
•
Bowl Connector Body
•
Retaining Clip
Scan the QR Code to see installation video or type into browser:
https://www.sachtler.com/en/product-support/aktiv-installation/
2.
Holding the Bowl Connector in place with one hand,
slide the Retaining Clip under 3 of the 4 positioning lugs
on the Bowl Connector and snap into place.
3. Check that 3 lugs are correctly located in the
Retaining Clip indents.
TM
1.
Insert the Bowl Connector through the underside of the
tripod bowl.
