background image

Nr.

x

B

12

C

18

D

2

E

8

Sweet Basil

Nr.

x

1

1

2

1

3

3

4

1

5

1

Montagehandleiding / Instructions de montage /

Montageanleitung / Manual

1

Assembly Instructions

Helpline Number

If you have any problems or queries with this product please call our helpline on 
+44 (0)1406 372227 between the hours of 9am to 5.30pm Monday to Friday.

Gardman Limited, High Street, Moulton, Spalding, Lincolnshire PE12 6QD

08896

Wooden growhouse 

Before You Start

Please check that all components are present and read through 
these instructions carefully.

Assembly

1.  Check all screws are tight in the ready-made frame sections 

but avoid over-tightening.

2.  Do not yet remove the protective covers on the 

polycarbonate glazing: note the cover is on the outside of the 
panels.

3.  Assemble the back and side frames, and front braces (parts 

A

C1

C2

 & 

C3

) using the large screws (

H

) and the pre-drilled 

holes in the frame (See Fig 1).

4.   Fix the base plates (

G

) on the underside of two corners as 

required using screws (

J

).

5.  Add the shelves (

K

) to the shelf supports.

6.  Place the lid (

B

) in position so that the hinges are at the back 

and are facing downwards. Line up the lid with the frame 
sides and hold firmly whilst attaching the hinges to the back 
panel (

A

) using screws (

I

) (see Fig 3).

7.  To assemble the lid support arms: 

a.  Pass the washers over bolts (

F

) and insert the bolts, from  

  the outside, through the slots in the support arms and   
  into the pre-drilled holes in the sides (

C

).  Screw in part  

  way to secure them (see Fig 5).

 

b.  The wing bolt can be tightened when the lid is in the   
  required position. 

8.  Attach the doors (

D

) in the same way as the lid in point 6 

above, lining up the doors with the frame and attaching with 
screws (

I

) (see Fig 5).

9.  Attach one door latch (

P

) to the centre of the top bar so that 

it catches both doors and the other to the outside of one 
door as shown.

10. To complete the assembly, peel off the protective sheet from 

the polycarbonate panels and site the Growhouse in good 
light but out of prolonged fierce sunlight. Use the corner base 
plates to peg or bolt down the Growhouse if extra security 
is required.

  Care & maintenance

•  Extra coatings of wood preservative will prolong the life of 

the product but be sure to use one that is harmless to plants.

•  Avoid constant contact with wet soil by mounting the frame 

on bricks, slabs or wooden battens.

Parts & Fittings Supplied

Assembly Instructions

Helpline Number

If you have any problems or queries with this product please call our helpline on 
+44 (0)1406 372227 between the hours of 9am to 5.30pm Monday to Friday.

Gardman Limited, High Street, Moulton, Spalding, Lincolnshire PE12 6QD

08896

Wooden growhouse 

Before You Start

Please check that all components are present and read through 
these instructions carefully.

Assembly

1.  Check all screws are tight in the ready-made frame sections 

but avoid over-tightening.

2.  Do not yet remove the protective covers on the 

polycarbonate glazing: note the cover is on the outside of the 
panels.

3.  Assemble the back and side frames, and front braces (parts 

A

C1

C2

 & 

C3

) using the large screws (

H

) and the pre-drilled 

holes in the frame (See Fig 1).

4.   Fix the base plates (

G

) on the underside of two corners as 

required using screws (

J

).

5.  Add the shelves (

K

) to the shelf supports.

6.  Place the lid (

B

) in position so that the hinges are at the back 

and are facing downwards. Line up the lid with the frame 
sides and hold firmly whilst attaching the hinges to the back 
panel (

A

) using screws (

I

) (see Fig 3).

7.  To assemble the lid support arms: 

a.  Pass the washers over bolts (

F

) and insert the bolts, from  

  the outside, through the slots in the support arms and   
  into the pre-drilled holes in the sides (

C

).  Screw in part  

  way to secure them (see Fig 5).

 

b.  The wing bolt can be tightened when the lid is in the   
  required position. 

8.  Attach the doors (

D

) in the same way as the lid in point 6 

above, lining up the doors with the frame and attaching with 
screws (

I

) (see Fig 5).

9.  Attach one door latch (

P

) to the centre of the top bar so that 

it catches both doors and the other to the outside of one 
door as shown.

10. To complete the assembly, peel off the protective sheet from 

the polycarbonate panels and site the Growhouse in good 
light but out of prolonged fierce sunlight. Use the corner base 
plates to peg or bolt down the Growhouse if extra security 
is required.

  Care & maintenance

•  Extra coatings of wood preservative will prolong the life of 

the product but be sure to use one that is harmless to plants.

•  Avoid constant contact with wet soil by mounting the frame 

on bricks, slabs or wooden battens.

Parts & Fittings Supplied

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

120 L x 60 W x 116/142 H cm     RW2604

H

W

L

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

Extragroßes Gewächshaus aus Holz          Serre en bois extra large
Extra grote houten kas                               Vivero de madera extragrande
Serra di legno gigante

Ekstra stort væksthus af træ

Extra Large Wooden Grow House

08901

M3x40

M3x20

1

2

6

7

Nr.

x

6

1

7

1

8

1

A

14

1

2

Reviews: