background image

ENGINEERING STANDARDS 

  Rosedale Products Inc. 
  3730 west liberty Road 
  Ann Arbor, MI  48103 

 IOM 
 7_4_27 Model CR8.DOC 
 N:\IOM\ 

  

 

 Issue Date: 01MAY01 
 Revision: D 
 Revision Date: 24APR2015 

Specification No. 

7.4.27 

Page 1 of 14 

INSTALLATION, OPERATION AND MAINTENANCE MANUAL 

 

 

 
Rosedale Engineering Standards are the property of Rosedale Products, Inc.  A Rosedale Standard or copy thereof shall no be distributed (except with express approval of 
Rosedale Products, Inc.) to any individual or firm beyond the intended recipient firm or individual.  Firms of individuals acting contrary to the above may be subject to 
suit, ineligibility for continued or future employment, or removal from Rosedale’s “Approved Manufacturers and Specialty Contractors List”. 
 

 

 

 

INSTALLATION, OPERATION AND 

 

MAINTENANCE MANUAL

 

 

ROSEDALE PRODUCTS, INC. 

 

                           
 
 
 
 
 
 
 

MODEL CR8 

CR8302F*100PP*-PB (STANDARD BAG FILTER) 

CR81352F*100PP*-700 (STANDARD CARTRIDGE FILTER) 

CR81352F*100PP*-700-PB (CONVERTIBLE FILTER) 

 
 

Table of Contents

 

 

 
I. 

Installation of Bag Filter Vessel (Diagram A)...................................................................... 2 

 
II. 

Operation of Bag Filter Vessel............................................................................................... 4 

 
III. 

Installation of Cartridge Filter Vessel (Diagram B) ............................................................ 6 

 

IV. 

Operation of Bag Filter Vessel............................................................................................... 7 

 

V. 

Spare Parts List........................................................................................................................ 9 

 
VI. 

Pressure-Temperature Rating Chart ................................................................................... 10 

 
VII. 

Diagram A.............................................................................................................................. 11 

 

VIII.  Diagram B .............................................................................................................................. 12 

 

 

Summary of Contents for CR8 Series















Reviews: