FC/May 10
Colossus
Instruction Manual
1.
Check you have the correct enclosure and tray. Please look at the labels on the side of the product packaging.
2.
Check all the product components are in the box and the fixing kits are complete. Please check this with the component check list overleaf.
3.
Un Pack your product and handle it with care.
4.
Please check the product for defects or damage. Once the installation has commenced we cannot accept responsibility for any defects or
damage to the products.
5.
Please take the time to read these instructions prior to installing your product.
6.
Before you commence any drilling check there are no hidden electrical cables and/or water pipes in the walls.
7.
No attempt should be made to re-work the toughened safety glass.
8.
The installation should be performed by two persons.
9.
It is strongly recommended the walls the product is going to be installed on are vertical. However the wall profiles have 25mm of adjustment
to help compensate for some deviation.
10. It is strongly recommended the product is fitted on tiled surface or similar waterproof surface.
11. It is strongly recommended the walls are tiled and grouted after the installation of the tray and before the installation of the product. This will
provide maximum adjustment and help when sealing the product.
12. If the walls and/or the tray are not level you will not achieve maximum adjustment of the product.
13. Pictures used are for illustration purposes only, product designs may alter slightly as a result of continuing product development.
14. We do not stipulate where the European Standard Kite Mark should be positioned on the glass panels
when being factory assembled.
IMPORTANT INFORMATION
•
Roman’s toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed
according to our guidelines.
•
It is important to note, that the glass must not be mounted or ‘pinched’ in such a way that would cause a stress point to develop in the
glass. In addition, it must not be subjected to any sharp impact or severe temperature fluctuation which may also cause a stress point to
develop in the glass.
•
Roman’s toughened glass is physically and thermally significantly stronger than standard glass. During our toughening process the
stresses contained within any glass are balanced so if in the unlikely situation any of the above occurs and the glass breaks, the glass will
shatter safely into small thumbnail sized blunt fragments.
IMPORTANT PRE-INSTALLATION CHECKS
IMPORTANT: IF YOU ARE FITTING THIS PRODUCT WITH INTEGRATED WATER DELIVERY, THE VALVE MUST BE INSTALLED
BEFORE TILING THE SHOWERING AREA AND BEFORE THE INSTALLATION OF THIS PRODUCT.
FC
Consumer Guarantee -
Please make sure the purchaser/end user completes and returns the Guarantee card
which is enclosed with this product. Failure to validate the Guarantee will mean only the 1 Year Statutory Guarantee will apply.
FC:CQB
4/5/10
12:13 Page 1
