Rollo Rieper Duette VS1 Mounting Instructions Download

Page: 1 / 4

PLEATED BLINDS

Mounting instructions

Pleated blind Duette VS1 / VS2

Dear Rollo Rieper customer,

This pleated blind system was made to measure especially for your windows.

If you have purchased a VS1 please read the instructions from point 1, if you have a VS2 start at point 2.

Rollo Rieper

Humboldtstraße 125-129
28203 Bremen
Germany

Tel. +49(0)421 – 700 366
Fax. +49(0)421 – 700 288

www.rollo-rieper.de

Quality materials and a perfect design ensure a long service life and will provide much joy

with the purchased product.

Please read the following instructions carefully before installation.

Summary of Contents for Duette VS1

Page 1: ...e read the instructions from point 1 if you have a VS2 start at point 2 Rollo Rieper Humboldtstra e 125 129 28203 Bremen Germany Tel 49 0 421 700 366 Fax 49 0 421 700 288 info rollo rieper de www roll...

Page 2: ...the carrier with an audible click 2 Mounting clamping shoe VS1 VS2 C Please ensure that the system cord runs through the rear slot of the clamping shoe If the Pleated blind s tension is too low please...

Page 3: ...t Assemble the tension bracket perpendicularly below the pleated blind and screw on the clamping shoes Spannschuhe auf Then push on the caps VS2 only The tension brackets must be assembled absolutely...

Page 4: ...g Dust usually can be removed using a soft cloth brush or gently vacuumed For wet cleaning place the pleated blind on a flat surface Gently wipe off the pleated blind on both sides using a soft cloth...