background image

Thank you very much for purchasing this product.

•  To ensure correct and safe usage with a full understanding of this product's performance, please be sure to read through 

this manual completely and store it in a safe location.

•  When purchasing, please ensure that the stamp and address of your authorized Roland DG Corp. dealer, as well as the 

date of purchase, are filled in on the Warranty and please store this Warranty in safe place.

•  Unauthorized copying or transferal, in whole or in part, of this manual is prohibited.
• 

The specifications of this product and the contents of this operation manual are subject to change without notice.

• 

The documentation and the product have been prepared and tested as much as possible. If you find any misprint or error, 

please inform us.

•  Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur through use of this 

product, regardless of any failure to perform on the part of this product.

•  Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage that may occur with respect to any 

article made using this product.

User's Manual

Auxiliary Drying Unit

R4-180111

Summary of Contents for DU2-54











































Reviews: