Keyboard
First time use
When you unpack your Capsule keyboard, the internal battery is
only partially charged. You should charge it fully before using it.
Charge the battery
Connect your Capsule keyboard to a computer or the power adapter
using the USB cable (provided) to charge the internal battery.
Note
: USB cable charging voltage is 4.4v ~ 6.0v. It is recommended
that you use iPad chargers or regular computers.
Capsule Keyboard Case
RF-iCAP23
I
Quick Setup Guide
# Component
1 Earphone
jack
2 Battery
LED
3 Bluetooth
connection
LED
4 30-pin connect slot
5 Micro USB port
6 Release
button
7 Latch
lock
Package contents
• Capsule keyboard
• Ear phone jack spare cover
• USB cable
•
Quick Setup Guide
Features
• 82-key design, 18 hot keys for iPad 3rd Generation
• Compatible with Apple iPad 2
• Protective hard shell construction - Enhanced durability and stability
• Smart power management - Auto turn off when closed.
• Bluetooth version 3.0
Capsule parts
Setting up Capsule keyboard
1
Insert a finger into the gap,
then lift to open the top panel.
2a
For typing mode, align and
2b
For stand mode, pull the top panel
place the top panel on the gap.
forward towards the keyboard.
3
Place the bottom edge of the iPad
into the bottom of the top panel, push
up on the latch, then move the top
edge of the iPad into the top panel.
4
Release the latch to lock the iPad
in place.
5
To change out of typing Mode,
push the release button and pull the
top panel forward towards the keyboard.
# Description
1 Home
button
2 Search
button
3
Photo Slide Show button
4
Virtual Keyboard button
5
Select Left button
6
Select Right button
7 Copy
button
8 Cut
button
9 Paste
button
# Description
10
Previous track button
11 Play/Pause
button
12
Next track button
13 Mute
button
14
Volume down button
15
Volume up button
16 Lock
button
17 Pairing
button
18
International keyboard button
Description
Remove the rubber piece to connect an earphone to the iPad earphone jack.
Orange OFF
: Battery full;
Orange ON
: Battery charging;
Orange BLINKING
: Battery low
Blue FAST BLINKING (10 seconds): Re-connecting
Blue BLINKING (5 minutes): Searching for devices (pairing)
Blue ON (2 seconds): Just connected
Slide out the rubber piece to connect the 30-pin connector.
Connect to a USB power supply (e.g. wall charger or computer) with a Micro
USB cable to charge Capsule battery.
Push to release the top panel when in typing mode.
Slide latch lock upward to install iPad. Release and the iPad will lock into place.
B
B
A
A
A
