1
Description:
ROBINHOOD IRONING CENTRE SURFACE MOUNTING KIT
Model Numbers:
ICSMK
Thank you for purchasing a quality Robinhood ironing surface mounting kit. This kit is designed to fit a surface
mounted IC1300 Ironing Centre.
Important:
o
Please read the entire instructions before installing the ironing centre/surface mounting kit.
o
Please allow 100mm clear area on either side of ironing centre for surface mounting kit installation.
o
(Alternatively install surface mounting kit to Ironing Centre before installing to the wall)
o
Should you be fitting a door to the enclosure holding this product, please be mindful of the position of all door
furniture (hinges, handles etc). Specifically ensure the board will operate without obstruction.
o
Do not place EXCESSIVE WEIGHT (weight should not exceed 15kg) on the ironing board when opened, as it is
designed to only accept normal ironing use only.
o
The product is not intended for use by small children or infirm persons without supervision.
Contents of packaging:
2 x collar sides (A)
1 x collar top (B)
1 x collar bottom (C)
1 x instructions
1 x packet of fasteners
- 2 x edge covers(D), 8 x small screws size 6” x ¼”(E), 6 x large screws size 8” x ¾”(F), 1 x edge saddle (G)
Pre-installation
Collar Kit Assembly
Typical equipment required:
o
electric drill
o
screwdriver
o
tape measure
o
spirit level
A
B
C
D
E
F
G
DIAGRAM 1
EDGE COVER
POSITION
REAR VIEW
IC1300
Code:
150273
