![background image](http://html.mh-extra.com/html/robe/ambiane/ambiane_user-manual_1468897001.webp)
1
User manual
Ambiane TW
The unit generates colored light by means of high power LEDs. The product was designed for indoor use only.
1. Attention
The unit must be installed by a qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
Avoid looking directly into the LED light beam at close range!
Do not install the unit near highly inflammable liquids or materials.
Do not allow anything to rest on the unit.
Do not use the unit near high humidity or water or expose to rain.
Do not install the unit near an open flame.
Do not install the unit in dirty,dusty or badly ventilated location.
Sufficient air accessing to the housing of the unit has to be ensured,
there must not be any heat or anti-noise insulation within a 0.6m x 0.6m
area around the unit (non-IC rated fixture).
Alvays switch off power suply of the unit before connecting or disconnecting the unit
2. Installation
1. Prepare a circular opening in the lower ceiling (1) as shown in the picture below.
2. Insert the Ambiane unit into the opening. Fasten the fixture by means of two spring fasteners (2) to the opening