1
*
Programming Quick Guide
-OM7220L
Installation
Make sure that the scanner has the correct cable to plug in the PC as
below described:
*Note : Please install PL-2303 driver for USB serial
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have scanned the
incorrect codes, please scan from A1 to A3 for USB HID or B1 to B5 for
RS232 or USB Serial. This will reset the scanner to its factory defaults.
A1
0006010
B1
0006010
A2
0001160
B2
0001160
A3
0006000
B3
1100000
B4
0310020
B5
0006000
*
*Note: Please install PL-2303 driver for USB Serial.
Barcode Configuration Method:
(Flow chart for setup procedure :)
Start
Configuration
End
Configuration
0006010
0006000
Keyboard Country (For USB HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States
: @ | $ # { } [ ] = / ‘ \ < > ~
1103001
1103002
USA
Japan
1103003
1103004
Denmark
Finland
1103005
1103227
France
UK
1103007
1103008
Italy
Norway
1103006
1103226
Turkey F
Turkey Q
Keyboard Country (For USB HID only)
Scan the appropriate country code as below to program the keyboard
layout for your country or language. As a general rule, the following
characters are supported, but need special care for countries other
than the United States
: @ | $ # { } [ ] = / ‘ \ < > ~
1103202
1103222
Belgium
Spain
1103209
1103220
Germany
Austria
Russia
1103223
1103218
Sweden
Portugal
1D Symbologies – 1
ENABLE
EAN-8
DISABLE
0401020
0401010
ENABLE
EAN-13
DISABLE
0402020
0402010
ENABLE
ISSN
DISABLE
0421020
0421010
ENABLE
ISBN
DISABLE
0416020
0416010
ENABLE
Codabar
DISABLE
0409020
0409010
