Programming Quick Guide
-DC9250: Docking Scanner
-DC9260: Wearable Scanner
Docking Scanner :
Gently touch the trigger area at the middle of scanner, to enable
the laser(for reading barcode)
Wearable Scanner :
Press the ring trigger to enable the laser.
Installation
They are Plug &Play USB (HID) devices. When plugged into your
Android OTG devices, it can be recognized as barcode scanner and
begin to scan the barcode. Before using scanner, make sure the
smartphone or tablet is fully charged.
Open your APP, they can work as a keyboard input.
Reset Configuration to Defaults
If you are unsure of the scanner configuration or have scanned the incorrect
codes, please scan the “Default” barcode. This will reset the scanner to its
factory defaults.
Default
Barcode Configuration Method:
(Flow chart for setup procedure :)
Start
Configuration
Abort
Configuration
End
Configuration
Multi-Interface Functions
LOUDER
SOUND
LEVEL
MIDDLE
LOWER
SILENT
LONG
SOUND /
LED CONTROL
MIDDLE
SHORT
Multi-Interface Functions
DOUBLE CHECK
(ENABLE)
DOUBLE
CHECK
DOUBLE CHECK
(DISABLE)
SINGLE SCAN
READING
MODE
SINGLE SCAN
NO TRIGGER
Keyboard Language
DENMARK
FRENCH
GERMANY
HUNGARY
JAPAN
ITALIAN
NORWEGIAN
PORTUGAL
SPANISH
SWEDISH
SWITZERLAND
USA
VIETNAM
1
