![background image](http://html1.mh-extra.com/html/rio/salon-laser-lahr2/salon-laser-lahr2_instructions_1463242001.webp)
instructions
w a r n i n g s
• Please retain this instruction leaflet for future reference
• Not suitable for Afro-Caribbean or black skin complexions.
See “Suitable Skin Types” in User Manual.
• Laser hair removal should not cause discomfort. If you feel any
discomfort or soreness the setting may be too high or your skin tone
(colour) is not suitable for use with this product.
• If irritation persists, consult a doctor.
• Inbuilt safety features protect the eye being exposed to the laser,
however, never aim the Wand at or near eyes.
• Do NOT use near flammable materials.
• Keep the product out of reach of children and pets.
• Reflection Hazard: Please remove all jewellery in the vicinity of the
treatment area before use.
• When not in use, store the key responsibly in a safe place away
from children.
• Do not treat the same hair repeatedly in any one session.
• Do not use after drinking alcohol or if you are feeling unwell
or fatigued.
• Do not treat the following areas: tattoos, permanent make-up, pimples,
warts, hair on black spots or moles, dark freckles, skin disease, birth
marks, burns, lips, nipples, genital or anal areas, eczema, eyelashes,
eyebrows, near the eyes, nasal or ear hair.
• This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
CAUTIONS
• Do NOT dismantle or repair. If you have any problems using the
product, contact our Customer Care Department.
• Misuse of the unit can cause harm.
• Do NOT override any safety features or open the unit or wand.
• Only use this product with the Mains Adapter supplied.
• Best results are achieved on hairs that have been shaved a day or
two before treatment or trimmed to 1mm–2mm in length.
• Remove all jewellery in the vicinity of the treatment area.
• Please ensure you have patch tested the area to be treated 24
hours prior to treatment.
Step 1
Plug Mains Adapter into socket on the Unit
and into the Mains.
Step 2
Use the Key to unlock the
Keyswitch.
The left Power Level light will
flash green.
Step 3
Enter “SECURITy KEy PRESS SEQUENCE”
within 60 seconds.
You will find the Security Key press
Sequence in the User Manual. please
ensure you read the User Manual before
proceeding.
Step 4
Use + and - buttons to set power level. Refer
to User Manual for skin types.
If you feel any discomfort reduce the power
level.
If the power level is adjusted the red Enable
light will flash.
Step 5
Press the Enable Button. The
red Enable light will stay on and
the amber light on the Wand
will illuminate.
T R E A T M E N T
PATCH TEST
IMPORTANT: 24 hours before treatment it is very important to do
a patch test.
The patch test will confirm the maximum power level for your skin
type. Each area to be treated must be checked as skin colour
can vary.
Please refer to the ‘PATCH TEST’ section in the user manual for
instructions.
808nm
wavelength
Wearing laser
safety goggles is
unnecessary as
the product has
been designed
with inbuilt safety
features.
1-IN-LAHR2-UK/2.1
this product MUSt be used responsibly.
please read these Instructions carefully
before use.
Refer to your User Manual for:
• WARNINGS
• SECURITY BUTTON SEQUENCE
• HOW DO LASERS WORK?
• SUITABLE SKIN TYPES
• PATCH TEST
• HAIR GROWTH CYCLE
• WHY IS A SERIES OF TREATMENTS
REQUIRED?
• YOUR QUESTIONS ANSWERED
• TROUBLESHOOTING
Step 6
When placed on the skin the amber light
will go OFF and the white ‘ready’ light will
illuminate.
Step 7
Press and HOLD the Laser
Button to start the red laser
treatment. you will hear a series
of high pitch beeps to indicate
the laser is operating. The laser
appears as a small red light.
this must be aimed at the hair ROOt.
Note:
On the lower power levels, the laser will pulse on and off for 4
seconds.
Note:
you may feel a ‘pin prick’ sensation during treatment, however,
most people do not feel anything.
Note:
Sometimes you can smell faint burning or even see a very, small
line of smoke as the hair is treated.
Step 8
When the red laser light treatment ceases the
amber light will come back on. you can now
move onto the next hair.
Note:
The Touch Pins must be removed briefly from the skin between
treating each hair.
Note:
Successfully treated hairs do not always fall out immediately, but
are shed over time as they are released from the hair follicle, light rubbing
can encourage this.
Step 9
After use, turn the Keyswitch to lock the unit.
Remove the Key to a safe place away from
children.
Note:
If no buttons are pressed after 20 minutes the Unit will enter energy
saving mode. The orange light will flash and power level 1 will remain on.
To restart turn key off and back on again and start at Step 3.
If you experience unexpected behaviour of this product then it is possible
some external electromagnetic interference is responsible. you should
remove this source and restart the product to restore full operation. At no
time will the laser fire unintentionally.
8
4
6
1
3
“security
Key Press
seQueNce”
5
LAHr2
2
9
saLON LasEr
HAIR REMOVAL SySTEM
™
PatentS PendinG
Rio,
Dezac,
Salon
Laser
Hair
Removal
System
and
Laser
Safe
Technology
are
trademarks
of
The
Dezac
Group
Ltd
©
The
Dezac
Group
Ltd
2010.
Manufactured
by
The
Dezac
Group
Ltd,
PO
Box
17,
Cheltenham,
England
GL53
7ET
a. Mains Adapter
b. Power Socket
c. Keys
d. Keyswitch
e. Power Level
(5 green lights)
f. Enable Button
g. Enable Light (red)
h. Hand-held Wand
i. Laser Button
j. Laser Shroud
and Touch Pins
k. Laser Aperture
l. White ‘ready’ Light
m. Amber Light
C O M P O N E N T S
7
cLAss 1 Product
coNtAiNiNg
cLAss 3B LAser
HAIR REMOVAL SYSTEM
A S E R
S L
A L O N
b
a
c
d
f
e
g
h
i
j
l
m
k