Ring Automatic Digital Air Compressor Instructions
Part No RAC600
Caution
Before operating this compressor, please read and become familiar with the entire
instruction leaflet and retain for future reference.
Read Carefully
Unless directions are followed, physical injury or property damage may result. When
using the compressor ensure you are parked in a safe location, off the road with the
car handbrake is on and your personal safety is not at risk. The Compressor must not
be used when the vehicle is moving. Never leave the compressor unattended. When
the compressor is not in use store in the bag provided.
Power required 12 volts DC rated at 10 amps DC.
This compressor is designed for occasional use only. Operation over an
extended period of time will overheat the unit and damage the compressor. It
is should not be used continuously for more than 30 minutes. After 30
minutes, turn it off and let it cool for 15 minutes before resuming operation.
If the compressor is making an abnormal sound, or the temperature of the unit
is too high, turn the power off immediately and let it cool for at least 30
minutes before resuming operation.
Do not use the air compressor on high pressure tyres such as those used on
commercial vehicles, agricultural or specialist vehicles.
Ensure that the device is stored in a dry place.
Do not allow the compressor to be positioned close to inflammable liquids or
gases. Do not allow the compressor to become wet.
Only use the adapters supplied with the device.
To Inflate Tyres – Manual Operation
Fig 1
Fig 2
Fig 3
Fig 4
Plug the cigarette lighter into the 12v socket. (Fig 1)
Screw the valve connector clockwise onto the tyre valve stem. Ensure the
connector is well connected with the stem. (Fig 2)
Push the ON / OFF button to switch the device on.
Press M button to select pressure gauge from Bar, Kpa, Psi (Fig 3)
Use the + and – buttons to increase or decrease the pressure.
Depress the ON/ OFF button to switch the device off.
Automatic Operation - preset the pressure value
:-
