![background image](http://html1.mh-extra.com/html/rimage/amigo-ii-everest/amigo-ii-everest_maintenance-schedule_1461803001.webp)
Amigo II
Maintain the Amigo II
Maintenance schedule
Task
Frequency
Once a week. Remove dust from Amigo II and surrounding work
area using a lint-free cloth.
Clean the Amigo II
Upon installation and again if the discs are not picked correctly from
the printer tray. Refer to the procedures below for more information.
Align the printer
Note:
For information on cleaning and maintaining your printer, refer to your
Everest Printer User Guide
or
PrismPlus! Printer User Guide
.
Everest Printer
To align your Everest Printer, refer to the following instructions.
Required tools:
y
T 25 Torx screwdriver
y
5/32” Allen wrench
1. To power on the Amigo II, press the Amigo II
power switch
.
2. Wait until the unit completes the initialization.
Tip:
The Everest II Printer takes 1 to 2 minutes to complete the initialization.
3. Prepare the unit for alignment.
a. Manually move the
lift arm
to the top of the
Amigo II.
b. To place a disc in the
lift arm
, press the
disc
up into the Lift Arm while pressing the
disc release button
.
c.
To open the print drawer, press the
printer
button
.
d. Close and re-open the
door
of the Amigo II.
This releases the lift arm so you can
manually move it.
Lift
Arm
Gripper
Disc Release Button
110654_G
1