![background image](http://html1.mh-extra.com/html/rigexpert/stick-230/stick-230_user-manual_1460636001.webp)
RigExpert Stick 230.
Users Manual
Stick
230
is an antenna and cable vector analyzer. The analyzer allows you to
measure various parameters of antennas, cables, lines, filters and many others in
the frequency range from 100 kHz to 230 MHz.
The
Stick 230
analyzer has a compact size and lightweight, which is great for using
the analyzer both in the home and in the field.
The main parameters of the Stick 230 analyzer:
Operating frequency: 100 kHz
– 230 MHz
Size: 185 * 40 * 33 mm (7,3 in x 1,6 in x 1,3 in)
Weight: 185 grams (6.5 Oz) (unpacked, with battery installed)
Type of antenna connector: SO-239
Number of Enter Keys: 6
Display: monochrome e-paper, 200 * 200 pixels.
Type of battery used: Li-ion 18650 (included)
PC Connector Type: USB 2.0 Type-C
Charging Port Type: USB Type-C
Bluetooth Availability: Yes, Bluetooth ver. 4.2 BLE Single-mode, Class B
Battery Charge Time: 3 hours.
RF Power: -10 dBm (at 50 Ohm load)
Minimum frequency step: 1 kHz
Operating temperature: 0…40 °C (32…104 °F)
Turning on the analyzer.
The
Stick 230
analyzer can be turned on in several ways:
– by pressing the
key.
– when connecting the analyzer to a PC via a USB cable (the analyzer will turn on automatically).
– by long-pressing one of the keys :
Important! At the same time, the analyzer will turn on and activate the measurement mode to which the pressed key
corresponds.
You can turn off the analyzer from any mode by long pressing the
key.
Main menu.
After turning on the analyzer, using the
key a screen with the main menu of the analyzer is available for
the user.
In addition to service information, at the top of the screen (battery charge, the indication of connection to a
PC, charger, Bluetooth connection), the screen displays 4 main measuring functions of the analyzer: