background image

 

T

echnical

 

B

ulletin

 

PAGE: 1/1 

Reissued: 23-Mar-10 

Model: 

Al-P1

 Date: 

13-Mar-08

 No

.: RG179001c

 

 

 

RTB Reissue 

The items in bold italics have been corrected. 

Subject: 

Firmware Release Note: Network DocBox

 Prepared 

by: 

K.Hamada

 

From: 

1st Overseas Tech Support Sec., 1st PQM Dept.

 

 

Classification: 

 Troubleshooting 

 Mechanical 

 Paper path 

 Part information 

 Electrical 

 Transmit/receive 

 Action required 

 Service manual revision 

 Retrofit information 

 

 Other (

         

)  

 

This RTB has been issued to announce the firmware release information for the 

Network 

DocBox.

 

 

 

Version 

Program No. 

Effective Date 

1.02 

G1795744E 

April 2010 production 

1.01 

G1795744D 

December 2009 production 

1.00 

G1795744C 

November 2008 production 

0.33 

G1795744A 

1st Mass production 

 

Version  Modified Points or Symptom Corrected 

1.02 

Symptom corrected:  
1.  The printer might not transfer the job log or the access log to Web 

SmartDeviceMonitor or Remote Communication Gate S Pro. 

1.01 

Symptom corrected:  

1.  Duplicate logs might be transfered to Web SmartDeviceMonitor. 

1.00 

Symptom corrected:  
1.  Job names that include the "%s" character prevent Web SmartDeviceMonitor 

from retrieving the MFP's job list. 

2.  Job names that include the "%s" character prevent the Document server from 

being accessed by the web service. The result is that the Document Server 
cannot be seen from Web Image Monitor. 

3.  The setting that controls access to the Debug Log (SP5842-001 bit #7) has no 

effect. 

0.33 

1st Mass production 

 

Summary of Contents for SP 8200DN
















































































Reviews: