GTR120 wireless gate keypad manual
–
revision 1
1
Please note:
This product is compatible with
GTR058,
GTR099, GTR062, GTR078
swing gate motors.
How to pair the keypad to your gate opener:
1.
Press button
‘
LEARN
’ on Control Panel of Gate Opener on the Gate #1 until the LED on the control board lights up.
Please note:
the learn button must be released as soon as the LED on the control board lights up. If the button is held for too long it will erase
all remotes paired to the gate opener.
2.
Press the
“OK”
button twice.
3.
The
“LEARN”
LED will start to flash and then turn off;
4.
The keypad has now been paired.
5.
To open the gate, Press
“PIN”,
Input password (default password is
“
888888
”
) and press the
“OK”
button
6. You can press the
“OK”
button at any time to stop the gate moving.
GTR120
Wireless Keypad
Instruction Manual
How to change the default password:
1.
Press and release the
“PIN”
button
2.
Enter the 6-digit default entry code (factory default code is
“888888”
)
3.
Press and release the
“PIN”
button.
4.
Enter your new 6-digit code and press
“PIN”
to store it.
5.
The entry code should now be stored.
