Sit2Stand Single Monitor
Parts:
Column
Work Surface
VESA Mount
Base
Keyboard Tray
Cable
Management Clip
x3
Actuator Handle
Keyboard Tray Spacer
Plastic Cap
Screws:
M5x12mm x 2
M5x25mm x 4
M5x38mm x 4
To raise the keyboard and monitor, pull the actuator handle (located under
the work surface) upwards to release the lock. If additional force is required,
apply a slight upward force to the opposite corner of the work surface or
keyboard tray.
To lower the keyboard and monitor, pull the actuator handle (located under
the work surface) upwards to release the lock. Provide the appropriate
downward force on the work surface using the palms of your hands.
additional downward force by gripping the actuator and apply additional
downward force to the horizontal portion behind the column.
Up
Down
Monitor Mounting
Parts:
Screws:
M4x12mm x 4
M4x22mm x 4
Countersunk
Washer x 4
Spacer x 4
