Thank you for purchasing the
RichardSolo 12000 mAh Portable Jump Starter / Air Pump / Power Bank
.
Please read these instructions before operation and save for future reference.
12000 mAh Portable
Jump Starter / Air Pump /
Power Bank
Model: TY002
INSTRUCTION MANUAL
Inflator connector port
EC5 jumpstart socket
USB-A output port
USB-C input port
LED flashlight / SOS flasher
LCD screen
Power (ON/OFF)
Preset (+)
Preset (-)
Unit switch / LED
Mode switch
USB-C / USB-A charge cable (not shown)
Intelligent jumpstart cables with built-in LED safety module
Air inflator hose with connector for vehicle tires
3 Inflator hose adapters (ball needle, mattress nozzle, bike
tire connector)
Storage case (not shown)
1
1
7
7
12
2
2
8
8
13
13
3
3
9
9
14
14
4
4
10
10
15
15
5
5
11
11
16
6
6
Battery Layout
Included Parts/Accessories
Connect included USB charge cable (12) to any 5V/2A*
USB power source (not included)
Connect USB-C connector to USB-C input port (3) on
power bank
LCD charge icon (6) on power bank will flash and show
% of charge in power bank
When fully charged (100%) LCD shuts off — Remove
charge cable
Charge 12000 mAh Power Bank
Note:
Use 5V/2A for best results. Less than 2A will require a longer charge time. For optimum performance, wait until flashing charge icon on LCD
shuts off to ensure full charge capacity. Total charge time (0 - 100%) = about 6 hours.
1
2
3
4
