OPERATION INSTRUCTIONS FOR
RHINO
ACCEL PLUS
ACCEL PLUS
CAR ALARM SYSTEM
WITH BACKUP BATERY & ENGINE IMMOBILISATION
SYSTEM FEATURES:
~ Suitable for all petrol and diesel engine vehicles with 12V negative earth batteries
~ Microprocessor Controlled
~ Supplied with Two Multi-Function Remote Controls
~ Engine Immobilisation (On Board Relay - 15Amp max)
~ Backup Battery Capability (9V)
~ Arming and Disarming Confirmation Beeps
~ Visual Arming and Disarming Confirmation via Indicators
~ Two Stage Shock Sensor (Pre-warning System)
~ Shock Sensor Sensitivity Programmable via Remote Control (8 Levels)
~ Shock Sensor Isolation Programmable via Remote Control
~ Negative Trigger Input (Doors, Boot, Bonnet)
~ Personal Panic Trigger via Remote Control
~ Remote Control Car Locator
~ Automatic Siren Reset (30 Seconds)
~ Automatic Rearm (30 Seconds)
~ Alarm Memory
~ Selectable Current Sensing Circuit
~ Multi-tone Siren Sound or Select The Individual Tone You Prefer
~ Central Locking Control can be achieved by purchasing optional Rhino DLK Interface.
~ Supplied with Mounting Bracket, Hardware & Warning Stickers
~ Made in Taiwan
~ 12 Month Warranty
LED
BUTTON 2
BUTTON 1
TO ARM/DISARM ALARM
The system is activated by pressing
BUTTON 1
on the remote control transmitter once. The siren will beep once. The
indicators will flash once. The LED will start flashing.
THE ALARM IS NOW ARMED
.
To deactivate the system, press
BUTTON 1
again. The siren will beep twice. The indicators will flash twice. The LED
will stop flashing.
THE ALARM IS NOW DISARMED.
(Note: Please wait at least five seconds after arming before pressing the remote control again - see deleting shock
sensor below).
COMPLETE DEACTIVATION
can be achieved by turning the override keyswitch on the rear of the alarm to the
ON
position -
NOW
OVERRIDE IS ON
. The siren will sound immediately if main power is removed while the
system is armed. (If backup battery is installed).
