background image

        

WARNING:

 Read all 

Instructions before assembling 

this product. 

KEEP INSTRUCTIONS FOR 

FUTURE USE.

Page 1 of 12

CALLUM STORAGE BUNK BED

 - FULL-OVER-FULL

Made in Vietnam

Model No: 0821 - 79

Distributed in the U.S.A by:

RH Baby&Child

2900 N MACARTHUR DRIVE 

TRACY, CA 95376 

www.rhbabyandchild.com

Distributed in Canada by:

RH Canada, Inc. 

1500-1055 West Georgia Street 

Vancouver, British Columbia 

V6E4N7 

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact us first. You can also order parts by writing to 
the address above. Include the product model number, color, and a brief description of the part. Or call 1-800-762-1751.

CARE AND CLEANING

TOOLS AND INSTALLATION

Tools needed: Key Wrench (included).

Two people are recommended for assembly.

When inserting bolts, turn clockwise until tight. Then loosen 1/2-3/4 of a turn. After bed is completely assembled, 

return to each bolt and tighten.

DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning. If the crib is to be stored, store in a cool, 
dry place and carefully package all original hardware to protect from loss. 

Summary of Contents for 0821-79













Reviews: