Revolabs Fusion™ Microphone System- Polycom VSX7000s Setup Guide
N
OTES AND
C
AUTIONS
:
This setup guide will guide you through the steps needed to properly connect a
Revolabs Fusion Microphone System to a Polycom VSX7000s video codec.
1.
Connecting the Cables
2.
Configuring the VSX7000s Video Codec
Note:
It is important to carefully follow these instructions in order and completely.
Otherwise your Fusion Microphone System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1.
Revolabs Fusion 4 or 8 Channel Microphone System
2.
Polycom VSX7000s video codec
3.
Qty 2 RCA-RCA male cable
4.
Amplified speakers
