RET1024
Retina Vandal Proof Outdoor Camera
with SONY High Resolution CCD Sensor
USER MANUAL
INTRODUCTION
The RET1024 color camera employs the latest SONY technology optical components.
This indoor/outdoor model features a water – resistant housing. It will provide rich
color, high definition pictures. Easy to install and convenient to use. It will adapt to most
CCTV systems. Please read this instruction manual carefully to ensure proper use of the
product.
IN THE BOX
(1) RET1024 Vandal Proof Outdoor Camera
(1) User Manual
PRODUCT OVERVIEW
Sensor (CCD)
SONY 1/3” High Resolution CCD Sensor
Auto Gain Control (AGC)
Built-in auto gain control (AGC) circuit.
Auto-Electronic Shutter (AES)
Built-in auto electronic shutter function. The color camera’s AES speed can reach
1/1000,000.
Gama Characteristic
Camera Gama characteristic is 0.45.
Scanning Mode
NTSC or PAL mode.
Night-time Vision
N/A
CONNECTIONS
To prevent fire or shock hazard, do not expose the unit to prolonged
contact with water.
This symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature
accompanying the application.
This symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitude a risk of electrical shock to persons.
CAUTION
: TO REDUCE THE RISK OF ELECTRICAL SHOCK DO NOT REMOVE COVER
OR BACK. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
CAUTION
: TO PREVENT ELECTRICAL SHOCK AND RISK OF FIRE HAZARDS, DO NOT
USE OTHER THAN SPECIFIED POWER SOURCE.
CAUTION
: PLEASE NOTE THE CAMERA’S OPERATING TEMPERATURE AND ENVIRON-
MENT REQUIREMENTS. AVOID USING THE CAMERA AT EXTREME TEMPERATURES.
CAUTION
: NEVER POSITION THE CAMERA TO FACE THE SUN OR A BRIGHT OBJECT.
THIS MIGHT DAMAGE THE CCD.
CAUTION
: DO NOT MOUNT THE CAMERA NEAR A HEAT SOURCE.
CAUTION
: USE ONLY THE RECOMMENDED POWER SUPPLY.
CAUTION
: WHEN USING THE CAMERA IN LIGHTNING CONDITIONS, BE SURE TO
INSTALL A SURGE – PROTECTION DEVICE, OR DISCONNECT POWER SUPPLY PLUG
AND CABLE.
CAUTION
: IN ORDER TO CAPTURE HIGH QUALITY PICTURES, THE POWER SUPPLY’S
CABLE AND VIDEO OUTPUT CABLE SHOULD NOT BE TOO LONG.
WARNINGS
CAUTION
Risk of Electrical Shock DO NOT OPEN
CAUTION
Risk of Damaging Camera
Link wire rule
：
Power
Video
Moniter
DC 12V Power Supply
*sold separately
Video
12V DC
RET1024
