To shorten the Headrail size
Step 1
Remove
the End Cap from
the Headrail
(at the opposite end
from the control end
with the chain).
Step 2
Unlock and
slide back the Fast-
Fit Cord Roller unit
using the cord to pull
it away from the end
you will be cutting
(to unlock simply twist
the clear tab 90°).
Step 3
Mark the
distance you want to
remove – make sure
you allow 2mm for the
End Cap going back
on! Then using a saw,
cut through the
Headrail and Axle Bar.
Step 4
Once cut, put
the End Cap back in
place and reposition
and secure the
Fast-Fit Cord Roller
(to lock simply twist
the clear tab back 90º).
Please read all safety warning instructions before installation
and keep them in a safe place for future reference.
Roman Blind Safe-Release
™
Kit
Closed Cassette System with Safe-Release
™
Device
and Clip-In Adjustable Cord Stoppers with Hole
CHILD SAFE
APPROVED
RE
N
07
3--0
2-N
EW
-2
0-
05
TOOLS REQUIRED
HOW TO INSTALL
To Adjust
Width
To Install
Installation Instructions
rca-uk.com
TIP:
Move the Roller to just before cut point,
this supports the Axle Bar for easier cutting!
