background image

 

Page | 1                     

Ascento 37 Export St Lytton QLD PH: 1800 807 604  |   VSRM Inverter Contant Pressure Pumps |  V2016.12 

 

 

 

REEFE VSRM Inverter Constant Pressure System 

Variable Speed REEFE Multi-Stage Pump  

USER MANUAL     

Read this manual carefully before installation, and also refer to 
the diagrammatic installation guide provided separately.  If you 
don’t have this guide, please email [email protected] and 
request a copy.

      

 

 

 

 
 
 

REEFE®

 

VSRM Series Pumps use the latest VVVF (Variable Voltage 

and Variable Frequency) AC frequency speed regulation 
technology. Combined with pressure sensing technology through 
measuring of real-time system pressure, this allows the controller 
to automatically adjust the motor speed and maintain a constant outlet pressure. They are very efficient, easy to 
install and have user friendly interface controls for quick setup. No programming is required, simply set your desired 
operating pressure and press RUN…let the controller save you money on your operating costs. 

 

 
 
CONTENTS 

1. Features & Application 

 

2. Safety Notice 

 

 

3. Installation and Operating Instructions  
4. Maintenance          
5. Trouble Shooting   
6. Dimensions and Technical Data       

 

7. Warranty  
 

1. Features & Application 

1.1 Product Features 

VSRM  series  inverter  constant  pressure  water  supply  system  uses  the  latest  VVVF  (Variable  Voltage  and  Variable 
Frequency)  AC  Frequency  speed  regulation  technology,  combined  with  pressure  sensing  technology,  through 
measuring  of  real-time  system  pressure,  to  automatically  adjust  the  motor  speed,  to  keep  the  outlet  pressure 
constant. 

 
1.2 Applications 

1.2.1  Clean water supply  for commercial and domestic use, with  flooded suction.  Not to be  used for liquids other 
than  clean fresh  water.  Not  suitable  for saltwater.   Not  suitable  for suction lift  (drawing up from an underground 

Summary of Contents for VSRM Series















Reviews: