X Series Dual Instructions
Important: Read all instructions very carefully before installing your X Series Dual
XHO ADD-ON KIT. Reef Brite will not be responsible for any damages that may
result from improperly mounted or installed X Series kits.
The X Series will add some weight to your light system so it is especially important to
ensure your tank or mounting configuration can safely carry and distribute the additional
weight of your X Series system.
If unsure about the mounting and or attachment of the X Series system, we recommend
contacting a licensed professional to avoid serious personal injury or property damage.
If you have any questions before or during the installation of your X Series system,
please contact [email protected] and one of our customer service representatives will
be glad to assist you.
For faster service please provide your phone number and a good time to call. Thank
you.
Getting started: Make sure your fixture(s) are unplugged from the electrical outlet
and completely removed from the aquarium before attempting to install the X
Series Dual system.
If your fixture was in use even for just a short period let cool.
LED’s can get hot
during operation and can cause personal injury or damage surfaces if proper care
in handling is not taken.
Once cool, place fixture on a secure table or work surface.
