KADO
LUSSI FREESTANDING BATH
SPECIFICATIONS
Recommended use
Domestic, hotel and commercial
Material
Cast Solid Surface
Colour
White
Capacity
1505mm Bath - 267 Litres
1705mm Bath - 354 Litres
Weight
1505mm Bath - 115 kg
1705mm Bath - 130 kg
Size Options
1505mm x 730mm x 580mm
1705mm x 800mm x 580mm
Overflow
Yes
Tap hole
No Taphole
Tapware should be floor or wall mounted
Plug and Waste
40mm Pop Up Waste (included)
Fixing
Silicone to floor
Standard Inclusions
Bath Bag & Maintenance Kit (Included)
To see the complete KADO range go to
www.reece.com.au/bathrooms
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.
Damage caused by any improper treatment is not covered by the product warranty . Refer to Warranty Conditions.
CLEANING RECOMMENDATIONS
Dimensions are nominal measurements only
page 1 of 3
Disclaimer
: Products in this specification manual must by regulation be installed by licensed and
registered trade people. The manufacturer/distributor reserves the right to vary specifications or
delete models from their range without prior notification. Dimensions are nominal measurements only.
Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor
takes no responsibility for printing errors.
Tech Page Version 1
