background image

Care and Maintenance

Do not touch the laser lens.

Temperature changes can cause condensation to form on the laser lens. If condensation forms on the
lens, leave the disc compartment door open (with no disc) for an hour to remove condensation.

Exposure to direct sunlight or extreme heat (such as inside a car parked in the sun) can cause
damage or malfunction.

To prevent dust from reaching internal parts, keep the disc compartment door closed when not
in use  (except when necessary to remove condensation).

Do not place objects on top of the player.

Cleaning the Laser Lens

It’s important that you periodically clean the laser lens, especially when dust or
fingerprints are evident. Not cleaning the laser lens can result in inferior sound
quality or no sound at all. To clean the lens, follow these directions:

1. Turn off the unit’s power.
2. Open the disc compartment and remove the disc (if there is one).
3. Clean the lens with a soft brush or use a camera air blower brush.
4. If you still are not able to remove dirt particles, moisten a cotton swab with

isopropyl alcohol and gently apply to the face of the laser lens, rubbing gently until all traces
of dirt are removed.

Handling Compact Discs

To get the best possible sound from your compact discs, you need to keep them clean. Note the
following guidelines regarding the use and care of compact discs:

Don’t touch the playing surface (the side without the label).

Don’t store discs in places with high temperatures or high humidity—they can become warped.

Don’t put tape or any other adhesives on either side of the disc.

Don’t use cleaners or anti-static sprays on discs, such as those used on conventional
phonograph records.

Always store each disk in its case and not in the CD player.

Before playing a disc, wipe any dust or fingerprints from the playback surface with a soft cloth.
Wipe from the hub to the edge with a straight motion.

Precautions

Never open the cabinet under any circumstances. Any repairs or internal adjustments should be
made only by a trained technician.

Warning: 

Never operate this product with the cabinet removed.

Do not touch the player with wet hands. If any liquid enters the player cabinet, take the player
to a trained technician for inspection.

This compact disc player uses a laser to read the music on the disc. The laser mechanism
corresponds to the cartridge and stylus of a record player.  Although this product incorporates
a laser pick-up lens, it is completely safe when operated according to directions.

Discs rotate at high speed inside the player. Do not use damaged, warped, or cracked discs.

Playing a Disc

1.  Connect the headphones via the PHONES (green) jack and turn the volume all the way down.
2.  Press the OPEN button to open the CD compartment door and insert the CD of your choice

making sure the label side is facing up.

3. Press the  “PUSH CLOSE” mark on the right side of the CD compartment door to close it.
4. Slide the HOLD switch to the “off” position.
5. Press the PLAY/PAUSE button to begin CD play.

The LCD will show the total number of tracks and playing time of the loaded disc before starting
to play it. During play, the LCD will show the current track number and its elapsed playing time.

6. Adjust the volume to your desired level.
7. Press the PLAY/PAUSE button again to temporarily suspend disc activity. The LCD will flash.

Press the button a third time to resume disc activity.

8. Press the STOP button to end all disc activity.

NOTE:

 This unit is capable of playing a 3" CD single without an adapter.

Repeat Play

to repeat one:

1.  Press the P.MODE button until the Repeat 1 indicator (

 1) is displayed.

2. Choose the track you want to hear using the SKIP/SEARCH buttons, then press the PLAY/PAUSE

button to start play mode.

The unit will play the selected track to its end, automatically return to its beginning and play it again.

To repeat all:

Press the P.MODE button until the Repeat All indicator (

 ALL) is displayed.

The unit will play the disc from start to finish, return to the beginning and play it again.

Random Play

Press the P.MODE button until the Random indicator is displayed. The unit will play all tracks out
of sequence once.

Intro Play

1.  Press the P.MODE button until the Intro indicator flashes in the display.
2.  Press the PLAY/PAUSE button to activate the Intro feature.
The unit will play the first 10 seconds of each track on the disc and then stop automatically.

Program Play

1. Press the P.MODE button until the program indicator “M” flashes in the display.
2. Press the SKIP/SEARCH buttons to choose the track you want to hear.
3. Press the SET button to store the track number in that memory location. The next memory

location will flash in the display.

4. Repeat Steps 2 and 3 to store up to 22 tracks.
5.  Press the PLAY/PAUSE button to start the Program Play mode.
When the last track has played, the unit will automatically stop.

Program repeat play

1. Press the P.MODE button until the program repeat indicator (

 M) flashes in the display.

2. Follow Steps 2-5 above.
When the last track has finished playing, the unit will automatically return to the beginning of
the program and play it again.

To check program play list

1. Press the P.MODE button until the program memory indicator “M” appears in the display.
2. Press the SET button to scroll through the programmed tracks one by one in order.

To change the programmed play list

1. Press the SET button to find the track you want to replace.
2. Select a new track by pressing one of the SKIP/SEARCH buttons.
3. Press the SET button again to set the changes.
4. To start the Program Play mode, press the PLAY/PAUSE button.

To clear the programmed contents

Press the STOP button or OPEN button to clear the program.

Powering Up

There are three ways to power your CD player:

Battery Operation

for alkaline batteries:

1.  Slide the battery door on the bottom of the unit to the left to open.
2.  Insert 2 "AA" batteries with the correct polarities into the battery compartment.
3.  Close the battery door.

NOTE:

 The unit will not work, and the batteries will be drained and/or depleted if not inserted as shown above.

For nickel-cadmium (N

I

C

AD

) batteries:

This unit is equipped with battery recharging circuitry. For safety measures, it requires two
specifically made NICAD (nickle-cadmium) batteries. Use ONLY the following rechargeable battery
types: KENWOOD NB-77, KENWOOD NB-88 or PANASONIC RP-BP60D.

It is always a good idea to let nickel-cadmium batteries run all the way down before charging
them. Then when you do charge them, do so to their full potential and they will last longer and
provide more power.

To charge nicad batteries:

1.  Install nickel-cadmium batteries as instructed above.
2.  Connect the AC adapter to the DC 6V input jack.

WARNING

: Use the DC 6V input jack only if you have rechargeable nickel-cadmium batteries

installed. 

DO NOT CONNECT AN AC ADAPTER TO THE DC 6V INPUT JACK IF YOU HAVE

NON-RECHARGEABLE BATTERIES INSTALLED.

If you try to recharge non-rechargeable batteries, you may cause serious injury to yourself and/
or severely damage the CD player.

3.  Plug the AC adapter into an AC wall outlet and the CHARGING indicator lights up. The

batteries are now being recharged while the unit draws power from the AC wall outlet.

4.  After 15 hours (approx.), unplug the adapter from the wall outlet and disconnect it from the unit.

NOTE:

 DO NOT charge for more than 24 hours. Excessive charging  may adversely affect the performance of the

rechargeable batteries.

AC Adapter Operation

You can power your CD player with the AC adapter from any AC
outlet (110-120V 50/60Hz).  You can also recharge NiCad batteries
when they are installed in the battery compartment while the unit is operating by AC power.

To use the AC adapter, insert the plug of the adapter into the DC IN 6V jack on the right side of
the unit. Plug the adapter into an AC wall outlet.

NOTE: 

 

The CD player won’t run on batteries if the AC adapter is still plugged into the DC IN 6V jack.

Car (DC) power supply adapter

Plug the Car (DC) power supply adapter into the DC IN 6V jack
on the right side of the CD player, and then into the cigarette
lighter receptacle in your car.

Using Headphones

Your CD player has been equipped
with a PHONES (green) jack on the
left side of the unit. Insert the
plug of the headphone set into the
jack for private listening.

Connecting to Audio Systems

Your CD player has been equipped with a LINE OUT (black) jack on the left side of the unit to allow it
to operate in conjunction with another audio system. Using an audio line cable - not included - plug
one end into the LINE OUT (black) jack on your CD player and other into the CD/AUX input(s) jack on
the audio system.

features

VOLUME

Use the dial on the left side of the player to control the volume. Remember that you should always
set the volume to the minimum level before putting on your headphones, and then adjust the setting
to a desired level.

HEADPHONES

Insert the plug of the headphone  set into the PHONES (green) jack on the left side of the unit.

PLAY/PAUSE 

Press the PLAY/PAUSE button once to begin Play mode. Press again to pause play. The track number
will flash in the display while the disc is paused. Press a third time to resume Play mode.

STOP 

Press the STOP button once to stop Play mode, after which power will turn off automatically.

SKIP/SEARCH  

Press 

 once to skip to the beginning of the current track or repeatedly to skip to previous tracks.

Press and hold during play to search backward at high speed within the current track. Play resumes
when button is released.

Press 

 once to skip forward to the beginning of the next track or repeatedly to skip forward to

the beginning of other tracks. Press and hold during play to search forward at high speed within the
current track. Play resumes when button is released.

DBBS (Dynamic Bass Boost System)

DBBS is used to enhance low frequency (bass) levels. Make sure you set the volume to minimum
before activating the DBBS, then adjust to your desired level.

P. MODE

Press during play to choose various play modes available. Press once to Repeat One track. Press again
to Repeat All tracks. Press three times to activate the INTRO feature and hear the first 10 seconds of
each track on the CD. Press four times to play the tracks in Random order. Press five times to activate
Program Repeat and six times to activate Program Play.

HOLD

Use this switch to prevent accidental activation of unwanted functions while the unit is in Play or
Stop mode. The "on" position disables all function buttons, while the "off" position enables all
function buttons for normal operation.

LCD (Liquid Crystal Display)

The LCD will always display the number and elapsed time of the track playing while the disc is active.
In pause mode, the elapsed time will flash. The battery symbol (

 ) is displayed when the unit is

being powered by batteries. (

 ) blinks in the display when batteries are weak or running low.

anti skip (electronic skip protection)

The Electronic Skip Protection (ESP) system keeps your CDs from skipping when the player is jarred.
Note that ESP consumes additional power and wears down batteries more quickly. Thus it is
recommended to set the ESP off when the player is used in vibration-free situations.

Press the ANTI SKIP button to activate the feature. The ESP symbol appears in the LCD and fills up
with dots as the player stores music into memory. When the player is jarred, the memory is used and
the dots on the ESP symbol disappear one at a time. If the player undergoes continual jarring that
clears all of the dots, the music stops until the memory can be filled again; then it continues playing
where it left off.

Model RP-2215

20906610 (E/S Rev. 1)

Printed in Hong Kong

+

+

DC IN 3V

Federal Communications Commission (FCC)
Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

In accordance with FCC requirements, changes or modifications not expressly approved by
Thomson Consumer Electronics could void the user’s authority to operate this product.

This device generates and uses radio frequency (RF) energy, and if not installed and used properly,
this equipment may cause interference to radio and television reception.

If this equipment does cause interference to radio or television reception (which you can
determine by turning the equipment off and on), try to correct the interference by one or more of
the following measures:

Reorient the receiving antenna (that is, the antenna for the radio or television that is
“receiving” the interference).

Move the unit away from the equipment that is receiving interference.

Plug the unit into a different wall outlet so that the unit and the equipment receiving
interference are on different branch circuits.

If these measures do not eliminate the interference, please consult your dealer or an experienced
radio/television technician for additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, “How To Identify and Resolve Radio TV Interference
Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC
20402. Please specify stock number 004-000-00345-4 when ordering copies.

This product complies with DHHS Rules 21 CFR Subchapter J.  Applicable at the date of
manufacture.

Important Battery Information

Do not mix different types of batteries, such as an alkaline with a NiCad, or use new batteries
with old ones.

Be sure to follow the polarity (+/-) diagram in the battery compartment when installing
batteries. Reversing polarity may damage the batteries or the unit.

Alkaline batteries are good for about 10 hours of continuous CD play. Rechargeable batteries
substantially reduce play time.

For safety measures, it requires two specially made NICAD (nickle-cadmium) batteries. Use
ONLY the following rechargeable battery types: KENWOOD NB-77, KENWOOD NB-88 pr
PANASONIC RP-BP60D.

Using nickel-cadmium rechargeable batteries may result in shorter playing time. It is always a
good idea to let the nickel-cadmium batteries run all the way down before charging them.
Then when you do charge them, do so to their full potential and they will last longer and
provide more power.

Rechargeable batteries other than nickel-cadmium are not recommended. They may not
activate the battery charging circuitry.

If you’re not going to use your player for a month or more, be sure to remove batteries
because they can leak and damage the unit.
Rechargeable batteries may slowly lose their charge when stored, therefore an initial charge
may be required before use.

Dispose of batteries in the proper manner, according to federal, state, and local regulations.

Any battery may leak electrolyte if mixed with a different battery type, if inserted incorrectly,
if all batteries are not replaced at the same time, if disposed of in fire, or if an attempt is made
to charge a battery not intended to be recharged.

Discard leaky batteries immediately. Leaking batteries can cause skin burns or other personal
injury.

Remember that battery life is directly correlational to volume and bass listening levels. If you
use the volume and bass features at maximum levels, your batteries will operate at maximum
consumption.

Headset Safety

Do not play your headset at a high volume. 

Hearing experts advise against continuous

extended play.

If you experience a ringing in your ears, reduce volume or discontinue use.

Do not use while operating a motorized vehicle or bicycle, it may create a traffic hazard and is
illegal in many areas.

You should use extreme caution or temporarily discontinue use in potentially hazardous
situations.

Even if your headset is an open-air type designed to let you hear  outside sounds, don’t turn
up the volume so high that you can’t hear what’s around you.

Service Information

This product should be serviced only by those specially trained in appropriate servicing techniques.

For Your Records

In the event that service should be required, you may need both the model number and the serial
number. In the space below, record the date and place of purchase, and the serial number:

Date of Purchase ___________________________________________________________________________

Place of Purchase __________________________________________________________________________

Serial No.  _________________________________________________________________________________

Limited Warranty

What your warranty covers:

• Any defect in material or workmanship.

For how long after the original purchase:

• One year.
(The warranty period for rental units begins with the first rental or 45 days from date of
shipment to the rental firm, whichever comes first.)

What we will do:

• Provide you with a new or, at our option, a refurbished unit.
• The exchange unit is warranted for the remainder of your product’s original warranty period.

How to make a warranty claim:

• Properly pack your unit. Include any cables, etc., which were originally provided with the
product.We recommend using the original carton and packaging materials.
• Remove cassette tapes or CDs from unit before shipping as these will not be returned.
• Include in the package evidence of purchase date, such as the bill of sale. Also print your
name and address and a description of the defect. Send standard UPS or its equivalent to:

Thomson Consumer Electronics, Inc.
Product Exchange Center
32B Spur Drive
El Paso, Texas 79906

• Pay any charges billed to you by the Exchange Center for service not covered by the
warranty.
• Insure your shipment in case of loss or damage. Thomson accepts no liability in case of
damage or loss.
• A new or refurbished unit will be shipped to you by prepaid freight.

What your warranty 

does not 

cover:

• Customer instruction. Your owner's manual provides information regarding the operating
instructions and user controls. For additional information, ask your dealer.
• Installation and setup service adjustments
• Batteries
• Damage from misuse or neglect
• Products that have been modified or incorporated into other products.
• Product purchased or serviced outside the USA
• Acts of God, such as but not limited to lightning damage.

Product Registration:

• Please complete and mail the Product Registration Card packed with your unit. It will make it
easier to contact you should it ever be necessary. The return of the card is not required for
warranty coverage.

How state law relates to this warranty:

• This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.

If you purchased your product outside of the U.S.A:

• This warranty does not apply. Contact your dealer for warranty information.

P.O. Box 1976, Indianapolis, IN 46206
© 1998  Thomson Consumer Electronics, Inc.
Trademark(s) ® Registered
Marca(s) Registrada(s)

CAR/PERSONAL CD PLAYER

W

ITH

 E

LECTRONIC

 S

KIP

 P

ROTECTION

RP-2215

Have a Blast – Just Not in Your Eardrums

Make sure you turn down the volume on the unit
before you put on headphones. Increase the volume to
the desired level only 
after headphones are in place.

Listening to CD

S

 in your car

Adjusting the line cord

Because tape decks vary, you may need to adjust the line cord on the Cassette adapter
in order to get the cassette adapter to fit correctly into your car’s tape deck.

1. Gently pull the cord out of the restraining channel.
2. Change the cord orientation to fit your car stereo orientation.
3. Push the cord into place in the restraining channel.

playing compact discs

1. Select a power source (either battery power or the Car DC adapter)-see “Powering Up”.
2. Insert the Cassette adapter into the tape deck, and plug the cord into the CD

player’s PHONES (green) jack (located on the left side of the unit).

3. Set your car stereo volume to a low level.
4. Insert a compact disc and press PLAY. Adjust CD player’s volume to a mid level

(make sure DBBS is turned off).

5. Use the car stereo to adjust the volume, tone, etc. You may need to adjust the

volume on your CD player if you hear clicks or other distortion.

6. Before ejecting the cassette when you’re finished, make sure the car stereo’s

volume is turned down.

RP 7925

Removing a Disc

1. Press the STOP button to end all disc activity.
2. Press the OPEN button to open the CD compartment door.
3. Grasp the CD by its edge while gently press down on the unit's center spindle.
4. Lift the CD from the edge and remove it from the compartment.

Troubleshooting Guide

Problem

Cause

Solution

Disc is in place,

No power.

Make sure power adapter is

but won’t play.

getting power from outlet or
install fresh batteries.

Disc is in upside down.

Insert disc with label up.

Disc is dirty.

Clean the disc or try another
disc.

Batteries are weak.

Replace batteries or try AC/DC
power.

Adapter plugged into jack

Remove adapter from player to

but not into power source.

use with batteries, or plug into
outlet.

Problem

Cause

Solution

Sound skips.

Disc is damaged.

Insert a new disc.

Excessive external vibration. Find a more stable position.

Disc is in place, player is in

Requires headphones

Put on headphones.

play mode, but still no sound

.

or external amplifier.

Adjust volume.

Poor connections.

Check connections.

PAUSE is active.

Press PLAY/PAUSE to put in play
mode.

Unit will not scan the disc.

Batteries are weak.

Replace batteries  or try AC/DC

Play is erratic

power.

Dirty or damaged disc.

 Replace or clean the disc.

CD door is not closed tightly. Close door tightly.
Disc not seated correctly.

Press down firmly .

Laser
lens

Reviews: