background image

1

Table of Contents

Setup and connections .......................................................... 3

Step 1: Unpack the TV ...................................................................... 4

Step 2: Connecting your TV ............................................................. 4

TV Only (PIP Not Available) ....................................................... 4

The Basic connection (pip not available) .................................. 5

Advanced Connections .............................................................. 6

Step 3:Connecting the IR Controller ............................................... 9

Attaching the IR Controllers ..................................................... 9

Step 4: Plug in the TV ..................................................................... 10

Step 5: Place batteries in remote .................................................. 10

Step 6: Turn on the TV ................................................................... 10

On-Screen Program Guide ....................................................... 10

Step 7: Program the TV .................................................................. 10

Interactive Setup .................................................................... 11

Using Point and Select ................................................................... 12

Entering Setup ................................................................................ 12

Select a Language .......................................................................... 13

Auto Channel Search ..................................................................... 13

GUIDE Plus+ System ........................................................................ 14

Set the Time .................................................................................... 14

Set the VCR1 Channel (auto tuning) ............................................. 15

Set the VCR2 Channel (auto tuning) ............................................. 15

Set the DVD Channel (auto tuning) .............................................. 16

Set the SAT/CABLE Channel (auto tuning) .................................... 17

Label the Channels ......................................................................... 18

What Now? ..................................................................................... 18

Program the Remote ............................................................... 18

Using the Remote ..................................................................... 19

Remote Buttons ....................................................................... 20

Using the WHO•INPUT button ................................................ 21

Programming the Remote ............................................................. 22

Summary of Contents for P46920BL

















































Reviews: