![background image](http://html1.mh-extra.com/html/razer/proclick-mobile/proclick-mobile_quick-start_4067845001.webp)
INTRODUCTION
The Razer Pro|Click™ Mobile is the ideal solution for professionals on
the go or wherever space is a constraint. Experience high precision
performance and true freedom with Bluetooth® 2.0 connectivity.
Features
1
Bluetooth® 2.0 with adaptive frequency hopping
2
Ambidextrous design for comfortable fit
3
No drivers / No wire
System Requirements
•
Bluetooth® wireless technology enabled PC / Mac computer
•
Existing keyboard for setup
Package Contents
• Razer Pro|Click™ Mobile Notebook Mouse
• Quick Start Guide
• Travel Pouch
• AA Battery x 2
Smart
•
Sleek
•
Sexy
a
Mouse button 1 - Left click
b
Mouse button 2 - Right click
c
Mouse button 3 - Scroll wheel & button
d
Battery compartment
e
Pairing / Reset button
f
Optical sensor
g
On / Off button
Key Features
a
b
c
Note:
The pairing instruction herein is based on the Broadcom
Bluetooth software. Please follow the instruction that
comes with your Bluetooth software if you are not using
Broadcom software.
PC (Windows XP)
1. Press the Pairing/Reset button beneath the mouse.
2. Double-click on the ‘My Bluetooth Places’ icon from your Windows desktop to open the
Bluetooth Manager.
3 Double-click on ‘ Search for device in range’ to search all available Bluetooth devices.
4. The Bluetooth Mouse icon will be displayed in the window when found. Select ‘
Pro|Click Mobile’
and then press ‘Next’ to continue.
5. The Bluetooth Setup Wizard will take several seconds to configure related files to your system.
Press ‘Finish’ to complete the pairing process after the configuration.
MAC (OSX 10.4.8)
1. Press the Pairing/Reset button beneath the mouse.
2. Click on the Apple Menu, followed by ‘System Preferences’.
3. When a window pops up, click on the Bluetooth icon.
4. Under the ‘Settings’ tab, enable Bluetooth and check the ‘Discoverable’ box.
5. Under the ‘Devices’ tab, click on ‘Set Up New Device’ and follow the instructions of the Bluetooth
Setup Assistant.
6. Once the Pro|Click™ Mobile is detected, highlight it and click ‘Continue’ to finish the process.
Once the connection between the Pro|Click™ Mobile and your computer is established, the
connection is kept permanent. This means the connection to your mouse will be re-established
automatically each time Windows XP or Mac OSX 10.4.8 runs.
3
LED Option
The Razer logo on the battery compartment cover will pulse after 10 seconds of inactivity.
To deactivate the pulsing logo:
1. Press all three buttons of the Pro|Click™ Mobile simultaneously and hold for two seconds.
2. Release all three buttons.
Repeat the same steps to reactivate the pulsing logo.
g
e
d
f
*Pairing / Reset
Button
1
Inserting the Batteries
You will find batteries for the mouse included in this package. Use only new batteries
when replacing them in the future and change all of the batteries at the same time.
1a. Carefully remove the battery compartment cover by
pushing it back firmly.
1b. Insert new batteries and ensure the positive (+) and
negative (-) ends of the battery correspond to the
polarity indication inside the mouse. Close battery
compartment cover.
Note: Please make sure that your Bluetooth software supports HID (Human Interface Device) profile before the
pairing process.
2
Pairing Process
www.razerpro.com