Axiom XL supplementary information
Warning: Product installation and operation
• This product must be installed and operated in accordance with the instructions provided.
Failure to do so could result in personal injury, damage to your vessel and/or poor product
performance.
• Raymarine recommends certified installation by a Raymarine approved installer. A certified
installation qualifies for enhanced product warranty benefits. Contact your Raymarine dealer
for further details, and refer to the separate warranty document packed with your product.
Technical
accuracy
To
the
best
of
our
knowledge,
the
information
in
this
document
was
correct
at
the
time
it
was
produced.
However,
Raymarine
cannot
accept
liability
for
any
inaccuracies
or
omissions
it
may
contain.
In
addition,
our
policy
of
continuous
product
improvement
may
change
specifications
without
notice.
As
a
result,
Raymarine
cannot
accept
liability
for
any
differences
between
the
product
and
this
document.
Cable
suppression
ferrites
To
ensure
optimum
EMC
performance
and
to
comply
with
applicable
EMC
regulations
any
RayNet
cables
connected
to
this
product
must
have
a
suppression
ferrite
fitted.
Three
suppression
ferrites
are
included
with
your
display,
one
for
each
RayNet
connection.
Fit
a
ferrite
to
each
RayNet
cable
as
shown
below:
