![background image](http://html1.mh-extra.com/html/raymarine/a80544/a80544_installation-instructions_3936640001.webp)
Wireless handset and charging
holster installation instructions
Obtain the complete documentation for
your product
The supplied printed documentation is a subset of the full
documentation available for your product.
Important:
The latest versions of all English and translated
handbooks are available on the Raymarine website. Please
check the website to ensure you have the latest and complete
documentation and safety information for your product.
Warning: Product installation and
operation
• This product must be installed and operated in
accordance with the instructions provided. Failure
to do so could result in personal injury, damage to
your vessel and/or poor product performance.
• Raymarine recommends certified installation
by a Raymarine approved installer. A certified
installation qualifies for enhanced product
warranty benefits. Contact your Raymarine dealer
for further details, and refer to the separate
warranty document packed with your product.
Product disposal
Dispose of this product in accordance with the WEEE Directive.
The Waste Electrical and Electronic Equipment (WEEE) Directive
requires the recycling of waste electrical and electronic equipment
which contains materials, components and substances that
may be hazardous and present a risk to human health and the
environment when WEEE is not handled correctly.
Equipment marked with the crossed-out wheeled bin
symbol indicates that the equipment should not be disposed of
in unsorted household waste.
Local authorities in many regions have established collection
schemes under which residents can dispose of waste electrical
and electronic equipment at a recycling center or other collection
point.
For more information about suitable collection points for waste
electrical and electronic equipment in your region, refer to the
Raymarine website:
Wireless handsets
Wireless handsets are compatible with Ray63, Ray73, Ray90 and
Ray91 VHF DSC radios.
As a minimum the Wireless hub and Wireless handset accessories
are required to create a wireless handset station. Additionally a
Wireless speaker can be connected to each Wireless handset.
After connecting your Wireless hub to your VHF Radio, the process
for setting up a wireless handset station should be:
1.
Fully charge the Wireless handset.
2. Connect the Wireless handset to the Wireless hub.
3.
If required, connect a Wireless speaker to the Wireless
handset.
Parts supplied
1.
Wireless handset.
2. Wireless handset holster/ inductive charger.
3.
3 x fixings screws (M4x25).
4.
Documentation.
Unpack your product carefully to prevent damage or loss of
parts. Check the box contents against the list above. Retain the
packaging and documentation for future reference.
Mounting the charging holster for the
wireless handset
Before mounting, ensure that:
• Your selected location meets the location requirements found
in this document.
• You pay particular attention to the wireless location
requirements.
• The product operates correctly at the desired location before
mounting.
• The product does not interfere with nearby devices.
1. Using the supplied mounting template mark the location of the
mounting holes and if required, the cable hole.
2. Drill the mounting holes using a suitable size drill bit.
3. If required, use a 6.5 mm (0.26 in) drill bit to drill a hole for the
holster’s power cable.
4. Hold the holster in place and secure using the screws provided.
5. Place the Handset into the holster, ensuring it clicks into
position.
Wireless handset connections
The Wireless handset connects wirelessly to the Wireless hub, and
the Wireless speaker connects wirelessly to the Wireless handset.
Document number: 87334-3
AC;11144;2018-10-02T12:16:05
Date: 09-2018