1
Zonetech Firmware Update Instructions
To update the firmware on your Zonetech:
1.
Power on Zonetech and connect a Cat 5e cable from the
Computer Ethernet
port on Zonetech to an
Ethernet router/switch that has a DHCP server running.
2.
Press the
Info
knob on the front panel of Zonetech until the
Wired Network Setting
is displayed.
3.
Open a web browser (on the computer that is connected to the same router/switch from step 1) and type
in the following IP address:
http://172.28.0.52
.
4.
On the
Master Outputs
web page, press the
Login
button.
5.
At the Login prompt, type the default password
admin
and press the Login button.
