Manual-1
QUICK START
If this is your first equalizer, please do yourself and
your speakers a favor and read at least the first five pages.
“An ounce of prevention...,” and all that.
The MQ 302L is a stereo equalizer, so adjusting any
slider affects both channels simultaneously. Begin by
setting all sliders to their center detent (0 dB), and the
INPUT LEVEL
to its center detent (0 dB). Try to make
more cuts than boosts. After equalizing, use the
EQ
switch
to compare equalized and non-equalized signal. While
EQ
is switched to
ACTIVE
(
out
), adjust the
INPUT LEVEL
to the same level as when
EQ
is switched to
BYPASS
(
in
).
You may use either the XLR or ¼" connectors for
Inputs or Outputs. Connect only one
INPUT
type per
channel. The XLR and ¼" TRS inputs do not sum. You
may, however, use both types of
OUTPUT
S simulta-
neously if desired.
WEAR PARTS:
This product contains no wear parts.
OPERATORS MANUAL
MQ 302L
STEREO GRAPHIC EQUALIZER
