RPR-INS-GDS-HS1
RAM® HandStand™Assembly Guide
1.
Shift hand strap to the side to expose screw head. Loosen screw with screwdriver to disassemble:
2.
Insert Nut into center nut pocket of Slip Washer.
White nylon inside Nut must be facing upward.
3.
Insert Slip Washer with Nut into center hole of
your IntelliSkin™.
4.
While holding Nut in place, reassemble the
RAM® HandStand™ from the outside of your
IntelliSkin™, fully tightening down on the screw.
For a video demonstration of this assembly, visit www.rammount.com/part/RAM-GDS-HS1U
The RAM® HandStand is compatible with any IntelliSkin™
that features the unique circular interface on the back.
Nut
Slip Washer
HandStand™
RPR-INS-GDS-HS1
RAM® HandStand™Assembly Guide
1.
Shift hand strap to the side to expose screw head. Loosen screw with screwdriver to disassemble:
2.
Insert Nut into center nut pocket of Slip Washer.
White nylon inside Nut must be facing upward.
3.
Insert Slip Washer with Nut into center hole of
your IntelliSkin™.
4.
While holding Nut in place, reassemble the
RAM® HandStand™ from the outside of your
IntelliSkin™, fully tightening down on the screw.
For a video demonstration of this assembly, visit www.rammount.com/part/RAM-GDS-HS1U
The RAM® HandStand is compatible with any IntelliSkin™
that features the unique circular interface on the back.
Nut
Slip Washer
HandStand™
