Getting Started with E-Man Hybrid
™
Figure 1
E-Man Hybrid Controls and Indicators
LCD
Battery
Tray
(beneath display)
CC Key
MODE Key
Plunger Button
Volume Lock
Lever
Tip Ejector
Button
Activate the Battery
E-Man Hybrid is shipped with a plastic strip isolating the battery ter-
minal. Remove this strip by pulling straight out from the battery
tray. Press the plunger button to begin operation and clear “PrES”.
Set the Volume
I
Unlock the volume lock by moving the lever counterclockwise.
I
Set the desired volume by rotating the plunger button. The dis-
play changes as you rotate the button.
I
Stop at the desired volume and lock the volume lock to operate.
Display Modes
Press the MODE and CC keys for these modes.
MODE KEY:
Scrolls through these three display modes.
Pipet Mode:
Same operation as standard pipettes, see over.
Track Mode:
TRACK is displayed. The volume of sample in the
tip is shown in real time as the plunger button is depressed.
When pressed beyond the 1
ST STOP
position the display reads
“bLo” to indicate the Blowout part of the stroke.
Titrate Mode:
TITRATE is displayed. The LCD shows the volume
of sample dispensed from the tip in real time, as a negative num-
ber relative to the upper set volume (at the set volume the LCD
shows 0.0).
CC KEY:
Turns on or off the cycle counter, and clears the count.
Cycle Counter:
Cycle count is a visual reference of how many
true pipetting cycles have occurred in the current pipetting ses-
sion. CYCLES and the count number are shown in the display.
Figure 2
Volume Lock
9920-349 E-MAN_QRG 8/28/07 2:49 PM Page 1
