Rail King RAILKING E-8 AA Operating Manual Download | Manualshive

Page: 1 / 42

background image

RAILKING E-8 AA

DIESEL ENGINE

OPERATING INSTRUCTIONS

Thank you for purchasing the RailKing production of General Motor’s E-8
AA diesel engine. The engine’s durable ABS body and die-cast trucks are
traditionally sized for operation on any O-31 Gauge track. The engine
should operate for years with any compatible AC transformer (see the chart
on page 35 for a list of compatible transformers) and is completely
compatible with most 3-rail locomotives, rolling stock and accessories.

The locomotive is equipped with either an electronic horn or the
ProtoSound® Digital Sound and train control system which contains several
deluxe features that are simple and fun to operate. Each feature is described
among the following pages which should be read before the engine is
operated. For those of you who can’t wait to get started, the

Quick Start

Basic Operating Instructions

found on Pages 3 and 4 should be read so that

you understand the basics of the operating system. Please note that some
features are only found in the ProtoSound® models and are marked as such.
Features not marked as ProtoSound features are available in all models.

1
2
3
...
»

Summary of Contents for RAILKING E-8 AA











































Reviews:

No comments

Related manuals for RAILKING E-8 AA

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands