![background image](http://html1.mh-extra.com/html/radio-shack/40-1440/40-1440_user-manual_778786001.webp)
©2008.
RadioShack Corporation.
All rights reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
07A08
40-1440
Printed in Taiwan
40-1440
Thank you for purchasing your 25W
RMS/50W Max. Powerhorn from
RadioShack
. Please read this user’s
guide before installing, setting up
and using your new powerhorn.
What’s Included
Powerhorn
User’s
Guide
Specifications
Power Handling ............. 25 Watts (RMS)
Maximum Power ........................ 50 Watts
Voice Coil Impedance .................8 Ohms
Frequency Response ........500–10,000 Hz
Horn Diameter ..................... 4 × 6 Inches
..........................................(102 × 153 mm)
Overall Length ................... 8 in (203 mm)
Weight ...............................26.4 oz (750 g)
Specifications are subject to change and
improvement without notice. Actual product
may vary from the images found in this
document.
Limited Warranty
This product is warranted by
RadioShack
against manufacturing defects
in material and workmanship under normal use for ninety (90) days from
the date of purchase from
RadioShack
company-owned stores and
authorized
RadioShack
franchisees and dealers. EXCEPT AS PROVIDED
HEREIN,
RadioShack
MAKES NO EXPRESS WARRANTIES AND ANY
IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED
IN DURATION TO THE DURATION OF THE WRITTEN LIMITED
WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
RadioShack
SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO
CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO
ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY
BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF
ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED
TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF
TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF
RadioShack
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Some states do not allow limitations on how long an implied warranty
lasts or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the
product and the
RadioShack
sales receipt as proof of purchase date to
any
RadioShack
store.
RadioShack
will, at its option, unless otherwise
provided by law: (a) correct the defect by product repair without charge
for parts and labor; (b) replace the product with one of the same or
similar design; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the property
of
RadioShack
. New or reconditioned parts and products may be used
in the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period.
You will be charged for repair or replacement of the product made after
the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or
attributable to acts of God, abuse, accident, misuse, improper or
abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage
or current; (b) any repairs other than those provided by a
RadioShack
Authorized Service Facility; (c) consumables such as fuses or batteries;
(d) cosmetic damage; (e) transportation, shipping or insurance costs; or
(f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
RadioShack
Customer Relations
300 RadioShack Circle
Fort Worth, TX 76102 12/99
25W RMS/50W Max.
POWERHORN
Connecting
1. Connect the speaker wire with the white stripe to the PA
system’s negative (–) terminal.
2. Connect the speaker wire without a stripe to the PA
system’s positive (+) terminal.
Mounting
1. Remove the nuts, washers,
and screws from the base then
remove the speaker.
2. Attach the powerhorn’s base
to the mounting location and
fix with six suitable screws
(Dia.4.0x25.0~30.0mm) and nuts
(screws and nuts not supplied).
3. Place the speaker back onto
the base and secure with nuts,
washers and screws.
4. Adjust the powerhorn’s speaker
to the desired angle.
Cautions
:
• Be sure to tilt the powerhorn’s
speaker slightly downward to
prevent water collecting inside.
• Mount the powerhorn away
from heat sources.
www.radioshack.com
Protect the environment by recycling used
electronics. Go to www.ecyclingcentral.com to
find a recycle location near you.