H O M E S T O R A G E P R O D U C T S
WWW.RACORSTORAGESOLUTIONS.COM
Note: When choosing a location for your ladder make sure there is enough room to raise and lower the ladder. All obstruc-
tions and people should be moved out of the way when raising or lowering.
WARNING
All ceiling mounted parts are to be fixed to a ceiling joist only.
LADDER LIFT | LDL-1B
INSTRUCTIONS
Phillips driver
TOOLS REQUIRED
PARTS LIST
5/32” Drill bit
3/16” Drill bit
Drill
Tape Measure
x1
J-Hook
x1
Pulley/Rope/Strap
assembly
x1
Two-piece Pulley
assembly cover
x1
Rope cleat
x3
Lag screws
x4
Phillips screws
1
Mark the location for the J-hook on a ceiling joist.
The J-hook must be secured to the joist with 2 or 3
screws as shown. Pre-drill
3/16
in. pilot holes into
the ceiling joist and fasten the J-hook with provided
screws.
Lag screws
WARNING
Please read installation instructions carefully prior to installing. Before using the product thoroughly test the fully-weighted
product (with equipment in place) to ensure the product has been installed properly. Do not allow children to play on
product. ITW Brands is not responsible for any damage resulting from improper installation, overloading or product failure.
