1of2
Assembly Instruction Sheet #IS-COR8410K
_R1
For Style COR8410K
Package Contents
Please go to
for product cleaning tips. Go to the
selection.
(1) Medium Base Bulb 100W Maximum
www.quoizel.com
Care + Maintenance
Fixture can only be mounted in the direction indicated on page 2.
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Light Source:
Estimated Assembly Time:
Preparation:
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
A
Crossbar
x 1
Nipple
x 1
B
Lock Washer
x 1
Hex Nut
x 1
C
D
Mounting Ball
x 1
E
F
Fixture Body
x 1
STEP 1
Remove Cage with Glass
-
A. By using screwdrivers, remove the screw and hex nut from tabs.
B. Unscrew lock screws and remove the cage with glass from the
Fixture Body (F).
Screw
Hex Nut
Cage with Glass
Lock
Screw
F
F
Figure 1
Tab
STEP 2
Install Bulb and Cage with Glass
-
A. Install the bulb onto the socket and screw snugly into place.
B. Place the tab on the cage onto the tab on the backplate and align
mounting holes on the cage to holes on the fixture hood. Secure
them together with lock screws. Hand tighten until snug.
C. Place the screw back onto tabs and secure with the hex nut. Hand
tighten the screw until snug with screwdrivers.
STEP 3
Install Crossbar and Nipple
-
A. Secure the Crossbar (A) to the outlet box with outlet box screws (not
supplied). Tighten until snug.
Figure 3
F
Lock Screw
Bulb (not
supplied)
Cage with
Glass
Socket
Hex Nut
Tab
Tab
Screw
Figure 2
Mounting Hole
Hole
Backplate
Fixture Hood
2017 QuoizelInc.
RevisedDate:2017-11-23
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Outlet Box
Outlet Box Screw
(not included)
Green Ground
Screw
A
