EESeal
®
FilterSeal
Insertion Instructions
For Circular Connectors
The design and construction of EESeal
®
FilterSeals makes them easy to install by hand,
without special tools, but care is needed to ensure proper insertion.
Quell on
©
• 5639 Jefferson N.E. • Albuquerque, New Mexico 87109 • (505) 243-‐1423 •
February 17, 2012
©
2012 Quell Corp.
US Patent No. 5,686,697
Important Note: It is imperative that the EESeal be inserted “right
side up”. Failure to do so will prevent the EESeal from working as it’s
intended to, and may cause functional problems.
Step 1
Which side is UP?
The side with the
EESeal
®
logo is facing up
and is visible after the EESeal is inserted.
Important Note: It is imperative that the EESeal be inserted so its
pinholes are aligned with the matching pins in the connector – pin A
to pin A, or pin 1 to pin 1, and so on. Your EESeal may have a
different treatment for each pin, and proper orientation will ensure
each pin gets the correct circuit connection.
Step 2
Orient the EESeal
With the correct side up, orient the EESeal so
i t s p i n h o l e s r o u g h l y a l i g n t o t h e
corresponding pins in the host connector.
Most EESeals have at least pin A (or pin 1 if
your connector has numbers) marked to
assist you in this orientation.
Top
“right side up”
“
A” Pinhole
Connector
Shell
Pin A
EESeal
Logo
Bottom
