Machine components:
1
7
9
8
5
Caution: Product weighs 10.8kg,
please seek assistance before lifting
3
Please do not connect your replacement
machine to the power until step N6
The machine must be disconnected from the
power supply before continuing to the next step!
1
4
2
Remove the Meter
(f)
IS-300 Series Base
Product Replacement Guide
Average Time Required: 20 minutes
Slide the Meter
(f)
towards you
N1. Remove the components from your original machine
Machine Base
Open the door of the compartment situated to the
left of the Ink Cartridge
(e)
to reveal the Meter
(f)
Feed Table
Disconnect the LAN Cable
(c)
from the left hand
side by pressing and holding down the clip
LAN Cable
Remove replacement unit from box & place
original unit back into box ready for collection
N2. Unpack your replacement
Power Cable
Ink Cartridge
Meter
Removal
Disconnect the Power Cable
(d)
from the right hand
side of the machine
Installation
Lift the top cover to reveal Ink Cartridge
(e)
and Meter
(f)
compartment
Press down on the Cartridge
(e)
below the word
‘TOP’ until you hear a ‘click’
Remove the Ink Cartridge
(e)
and close the
machine cover
Remove the Feed Table
(a)
by lifting the machine
(b)
slightly and sliding the Feed Table downwards
to unlock
6
6
