Waterproof Drones - The HexH2O and QuadH2O professional waterproof drones
Waterproof Multirotors
https://www.quadh2o.com
The HexH2O V2 Build Guide
The following build guide is specifically for the HexH2o Version 2 model (
You are free to build the HexH2o in whichever way you wish, however we recommended you follow
is guide closely in order to get the most from your machine.
This tutorial is based on using the DJI E600 Tuned Propulsion System
HexH2o V2 is specifically designed for the DJI E600, if you wish to use a different propulsion
system please contact us before placing your order and we can supply you with the V1 model.
1. UNPACKING YOUR HEXH2O
Your kit will include:
Painted HexH2o V2 body
Foam buoyancy aids & retainer strips
Perspex viewing dome and rear hatch with retaining clips and seal
Carbon top and bottom plates
6 x Carbon Fibre 16mm arms
6 x Lightweight carbon motor mount assembly
6 x Folding centre arm assembly
HexH2o sticker kit
GoPro (3 & 4) anti reflection sticker
Electronics tray with DJI Naza and gimbal mounts
Distribution board mount
24v Cooling Fan
Bolt, washer and grommet kit
GPS Mount/casing assembly
Naza LED stand off and grommet assembly
Cable location mounts & cable ties
Velcro
Breather kit
2 x HexH2o hex keys and mini level
Gimbal lock (locks gimbal in place during transportation)
1 / 25
