background image

System Power Amplifier (SPA)

Installation Guide

SPA2-60 Amplifi er

SPA4-60 Amplifi er

SPA2-200 Amplifi er

SPA4-100 Amplifi er

 

EXPLANATION OF SYMBOLS

The term “

WARNING!

” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “

CAUTION!

” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in 

damage to the equipment that may not be covered under the warranty.

The term “

IMPORTANT!

” indicates instructions or information that are vital to the successful completion of the procedure.

The term "

NOTE

" is used to indicate additional useful information.

The intent of the lightning fl ash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous" 
voltage within the product's enclosure that may be of suffi cient magnitude to constitute a risk of electric shock to humans. 

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating 
and maintenance instructions in this manual.

What's in the Box

 (1x)

SPA2-60
SPA2-200
SPA4-60
SPA4-100

 (1x)

AC Power Cord, 
US

 (2x)

Rack Ear
QSC P/N 
CH-001344-00 

 (2x)

Joining Plate
QSC P/N 
CH-001345-00

 (2x)

Rack-Ear Spacer
QSC  P/N 
CH-001386-00

 (6x)

Phillips Pan Head 
M4 x 7 mm

 (6x)

Phillips Flathead 
M3 x 6 mm

 (4x)

Foam Spacer
QSC P/N
PL-001023-00

 (1x)

Rack-Ear Cover Label
QSC P/N
LB-001138-00

SPA 2-channel (1x)
SPA 4-channel (2x)

Euro Plug 3.5 mm, 
4 pos, grn
QSC P/N 
CO-000646-00

 SPA 2-channel  (1x)

Euro Plug 3.5 mm, 
5 pos, grn
QSC P/N 
CO-000644-00

 SPA 2-channel  (1x)

Euro Plug 3.5 mm, 
4 pos, blk
QSC P/N 
CO-000645-00

 SPA 4-channel (1x)

Plug 3.5 mm, 
10 pos, grn
QSC P/N 
CO-000647-00

 SPA 4-channel (1x)

Plug 3.5 mm, 
10 pos, grn
QSC P/N 
CO-000648-00

 (1x)

Warranty 
TD-000453

 (1x)

Safety Information 
TD-000337

   

TD-000500-01      -D

 

*TD-000500-01*

Summary of Contents for SPA2-60













Reviews: