background image

PRECAUTIONS 

 

 

Please follow these precautions: 

 

To prevent

 fire or shock hazard, do not expose the unit to rain or  

moisture. 

To prevent

 electrical shock, do not open the cabinet. Refer to qualified   

personnel for service only. 

Do not use 

the unit continuously for more than 24 hours with camera   

auto focus on. It may cause damage to the camera lens. 

Be careful not to

 spill water or other liquids onto the unit, or allow  

combustible or metallic objects to get inside the cabinet. 

Unplug

 the visulizer from the wall outlet when it is not being  

used for a long period of time. 

Clean

 

the cabinet

 with a soft cloth lightly moistened with a mild  

detergent solution. 

Clean the lens

 carefully with an air spray or soft dry cloth to avoid  

scratching it. 

When the lamps

 flash or become dark, they should be replaced with 

new ones. 

Avoid 

switching arm lights and back light frequently. 

Remove

 

the camera lens cap before power the unit on. 

 

CONTACTS: 

QOMO HITEVISION, LLC 
Toll Free: 1-866-990QOMO 
E-Mail: [email protected] 
Web: www.qomo.com 
 

1

 

 

Summary of Contents for HiteVision QView QD700





























Reviews: