background image

Item No.:PSW601AT

Item No.:PSW601AT

TV Size Range: 32

50

Maximum Weight Capacity: 60kg/132lbs

Adjustable angle: 5

15

"~ "

- ~

°

°

Balance adjust system is included

This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.

CAUTION

INSTALLATION GUIDE

-8-

This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.

!

.

Warning

Thank you for choosing our product

Thank you for choosing our product

±90°

±180°

±90°

Part 5-Adjusting display and using cord management

Route cords along articulating arms using cord management

s(5).

Articulating arms can be adjusted to position display into desired location.
Use 6x6 and 5x5 wrench to tighten and loosen the tension screw. Do not
overtighten and do not loosen to the point the screws come out.

clip

Part 5-Adjusting display and using cord management

UP

UP

5x5 wrench

6x6 wrench

www pyleaudio com

.

.

MADE IN CHINA

P yle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000

Summary of Contents for PSW601AT

Page 1: ...f this installation contact a professional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount and the display otherwise the structure must be reinforced 3 Safety gear and proper tools must be used A minimum of two people are required for this installation Failure to use safety gear can result in property damage serious injury or d...

Page 2: ... Lock open 2 3 1 Knob Lock closed Part 3 Attaching p cover to wall plate lastic Secure plastic cover over wall plate by pushing them toward each other until they lock in place Part 3 Attaching p cover to wall plate lastic 1 2 4 3 7 6 5 A H L I K J M Right bracket 6 6 6 4 I J K L M Square washer Long bolt Wall anchor Long bolt washer Spacer Description Arm assembly Left bracket M4 mm 12 bolt M4 mm ...

Page 3: ...ly Do not overtighten Part 1a Wood Stud Mounting 2 50mm Φ3 16 5mm I M F H Part 2b Attaching brackets to screen with recessed back Center brackets vertically on back of screen Select the medium F or G or large H screws Attach brackets to screen using four selected screws four square washers I and four spacers M at the top and bottom of each bracket Tighten screws firmly Do not overtighten Part 2b A...

Page 4: ...te Wall 2 50mm Φ3 8 10mm A E I Part 2a Attaching Brackets To Screen With Flat Back Center brackets vertically on back of screen Select the small A or B medium C or D or large E screws Attach brackets to screen using four selected screws and four square washers I at the top and bottomof each bracket Tighten screws firmly Do not overtighten Part 2a Attaching Brackets To Screen With Flat Back Square ...

Reviews: