pTron Pulsefit F21 Smart Fitness Band - User Manual
Important:
This smarband is not a Medical Device.
Wearing Method
Best to wear the band in your left hand wrist.
Please fit the adjusting holes according to your wrist size, and then do up wristband buckle.
The sensor should cling to skin to avoid movement.
Charging the Smartband
Please ensure the band has enough battery at your first time using it. Please charge the band first if it cannot
be powered on, and then band will automatically start working.
Charging Method
: Unplug the band body from both ends of the strap. Insert the USB plug of the band
correctly into the USB port of the computer or the device adapter (Power input should be 5V).
Power ON/OFF
1. In shutdown state, please touch the Multi-function Control (MFC) for over 2 seconds to start the band with
vibration.
2. Short touch on MFC until you see the function page. Short touch MFC until you get the power off interface.
3. When the power off interface appears long press MFC for 2 sec to power off the smart band.
Band Operation
1. In power on state, short touch the MFC to light up the screen to default page with date and time information.
2. In the default time/date page, short touch MFC can switch band to different pages. The screen will be
turned off if no operations for 5 seconds.
3. For checking Heart Rate/Blood Pressure, just wake up the screen with 1 touch on MFC, go to the Heart
Rate/Blood Pressure page, wait for measurement and then the result will be displayed on the screen.
Multi-function Control (MFC)
Single-Point Touch
