www.pspproducts.com
Phone: 800-648-6802
Fax: 703-393-9101
PSP Products Inc. - 8535 Phoenix Drive, Manassas, VA 20110
1
1.
To assure proper installation measure the voltage on each phase and insure the correct device is installed.
2.
Turn off power to circuit where surge protector is to be installed.
3.
Mount device so as to keep conductor length as short as possible. Cut wires to length and connect to circuit per wiring diagram below
avoiding sharp bends or looping.
4.
Reinstall covers, restore power and confirm diagnostic LED is Illuminated.
H1-75-04N Installation Instructions
Surge Protection Device 120/240 Volt AC Type 1
120/240 Vac Installation Diagram
Disconnect
120 Vac Installation Diagram
Service Panel
240V ac
120V ac
120V ac
Black
Black
Line 1
Line
Ground*
Ground*
Line 2
Neutral
Green
Green
Black
Black
120V ac
Diagnostic Operation
Device Ratings
LED On = System Protected
LED Off = Replace Device
Normal Voltage Per Leg
Max. Discharge Current (Imax)
Max. Operating Voltage (MCOV)Per Leg
Nipple mount to enclosure for type one installation
120 Vac
75 kA
150 Vac
*All surge protection devices require good ground
connection for effective operation
Installation Instructions
Ground
Black
Black Green
Ground
Green
Black
Neutral
