![background image](http://html1.mh-extra.com/html/psi/nxg-vision-ps36l-p7/nxg-vision-ps36l-p7_user-manual_1622787001.webp)
PS36L
-
P7
PS36L-P7
NOTE:
to PowerTec Solutions Models PS36L-K7 (Next Generation FTTx Micro UPS)
and all package accessories as listed below.
The reference to "NXG-Vision" within this User Manual refers
NXG-Vision INTRODUCTION
(when ordered with optional Universal )DC power supply and battery
back up device for Indoor 12Vdc Optical Network Terminals (ONT).
The NXG-Vision not only provides constant supply of DC power during
normal operating conditions, but offers battery backup power in case of
electrical power outage. NXG-Vision also provides customer facing
Network Interface Reset Intelligence to provide integrated ONT reset
technology designed to reduce Provider OPEX.
NXG-Vision is designed and intended for use as Desktop or Wall-mount
Please verify all standard contents are accounted for upon receipt of
NXG-Vision. STANDARD: (1) Power Supply/Charger; (1) Li Ion Battery Pack;
(1) AC Power Cord; (1) 7-Pin Connector; (1) User's Manual;Optional:
(1) Universal Wall Mount Enclosure w/ Cover.
NOTE:
PS36L-P7
VISUAL
INDICATORS
1
Battery
Color Red
-
Service or replace battery
or battery is not
installed
in
NXG
-
Vision
.
,
2
Mute
Color-Yellow
Flashing Audible Alarm silenced for 24hrs.
Soid
-
Audible
Alarm
Silence Until manually
enable.
-
3
DC
Color Green
-
NXG Vision is working off Standby Power.
-
4
System
Status
Color- Green
NXG Vision is Recieving AC power load to
operate
under
normal
conditions.
-
CONTROL SWITCHES
5
6
7
4
3
2
1
5
6
7
VISUAL AND AUDIBLE
STATUS
/
ALARM
SIGNALS
STATE
VISUAL
INDICATOR
AUDIBLE
INDICATOR
DESCRIPTION
Normal
System
Status
Indication On
Operating under normal AC
line power load
and
conditions
,
charges battery
.
Battery
is
connected
and
in good
condition
.
ON Battery
DC
Indicator
On
AC line power failure
or AC cord
disconnection
.
NXG
-
Vision
is being supplied
with battery
power
.
Replace
Battery
Battery
Indicator On
1 2 second audible
indicator
every 15
min.
/
Replace faulty or end of
life battery.
Battery
Missing
Battery
Indicator On
NXG Vision is operating
on AC
line power only
without
available
stanby power
for
outage
scenario
.
When battery
is removed
from
unit
,
battery
indicator
will
illuminate after 5
sec
.
-
Low Battery
DC Indicator
Flashes
1 2 second audible
indicator
4 times
per minute.
/
Battery has reached equal
to
or less
than
30
%
remaining
capacity on
battery
discharge
.
Review the following important safety warnings to avoid bodily injury or damage
to equipment during installation or operation of this device.
Read ALL instructions before attempting to install or operate this device.
This device is intended for indoor use only. To prevent the risk of fire or
eletrical shock, install in dry location free from damp or wet environment,
or potentially damp or wet environment.
Adhere to all acceptable operating environment limitations as listed to
prevent the risk of fire or electrical shock (see user specifications
within User's Manual)
Risk of fire or explosion if improper battery pack is installed and
attempted to operate with this device. Device is rated and approved for
use with PowerTec Solutions Internation Li Ion Battery Pack ONLY.
Follow User Manual instructions for proper installation and removal of
battery pack.
NO user-replaceable parts within this device. Do not remove cover for
any reason.
Allows NXG Vision to cold start power off
Battery
Pack
when
AC
line
power is
not
present
and
new
or
replacement
pack
is
connected
,
press
and
hold
for
3
seconds
.
-
Allows for DC line power reset of optical
Network
terminal.Press
and hold
for
3
seconds
to
reset
/
reboot optical
newwork
terminal.
Alarm
Silence
Cold
Start
N.I.R.
Reset
Disables Audible Alarm function. Press and release
to disable Audible Alarm for 24 hours. Press and hold
for 15 seconds to disable Audible Alarm indefinitely.
Press and hold for another 15 seconds in order to
re-enable Audible Alarm function.